Soft cast bullets need about 1200fps to expand, for subs a HP is essential
Liked On: 17-11-2024, 01:29 PM
I definitely think I'm starting to like the "shit" side more 263301!
Liked On: 17-11-2024, 01:27 PM
Have done this, would recommend. You can get some crazy light dyneema rope (~5mm) and some tiny multiple pulley blocks at a yachting shop, the whole set-up is smaller than a can of beer and will hold...
Liked On: 16-11-2024, 07:58 AM
It was one of those things I put together when I started hunting, then never used because it was just more crap to carry. I tested it on my son who was about 5 years old at the time and it worked...
Liked On: 16-11-2024, 07:57 AM
Also the 17 blows bloody great holes in them, my best bunny gun was a .22 Hornet with cast bullets just a nice neat hole and dead on the spot.
Liked On: 15-11-2024, 02:45 PM
I've got the same, and have it mounted on a plate with holes and chains as a poor mans winch on motorbike. Can attach it front or rear.
Liked On: 15-11-2024, 02:42 PM
Had one of these in my pack for 40 odd years. Only recently found I needed to use it. Then found I'd left it behind lol.
Liked On: 15-11-2024, 02:42 PM
As we get older we need new tools and ideas for making things easier, with my son telling me he is moving over seas soon I can no longer rely on him to help me lift animals up to hang them under the...
Liked On: 15-11-2024, 02:41 PM
I own a lot of 22s, and shoot almost exclusively 22s. Here is my take. 1. People tend to hang on to their accurate 22s, because there are always opportunities to shoot them. Accurate second hand...
Liked On: 15-11-2024, 10:56 AM
17HMR is way louder. You can have it suppressed so it does not hurt your ears but never quiet enough so it doesnt scare away other game. if your hunting area is somewhat limited, you dont want to...
Liked On: 15-11-2024, 10:53 AM
Never thought of that. Thanks!
Liked On: 15-11-2024, 10:10 AM
Older wooden norinco is very hard to beat....fullstop.
Liked On: 14-11-2024, 05:29 PM
Ha ha! 173580 Despite an occasional cheapskate inclination, I haven't tried beer cans or roof flashing. The ease of production with the precision cut coil is worth every penny. Commercial...
Liked On: 10-11-2024, 06:25 AM
Only just stumbled on this thread so apologies for the late response. I'm churning out 30 cal gas checks using a Checkmaker from Patmarlins and 0.015" aluminium coil from Yonky. Here are some...
Liked On: 10-11-2024, 06:25 AM
Greetings All, A few bits of trivia. The card wad in .303 cartridges was there primarily to hold the cordite in place when the case was formed to its final shape. Anyone who has broken down a...
Liked On: 10-11-2024, 06:24 AM