lau lau
Member

228 Likes

Page 1 of 16 123456789101112131415 ... Last

• Jump to page:

1. 
   chainsaw liked post by lau lau On thread : Berger Hybrid Target - any good for hunting?

   I was using the 230gr berger hybrids in my 300prc, with good results on game have since switched to the 230gr Atip

   Liked On: 30-03-2025, 09:37 AM

2. 
   Roarless20 liked post by lau lau On thread : 7mm rem magnum accuracy issue

   Make sure it hasn't developed a carbon ring

   Liked On: 23-03-2025, 08:50 PM

3. 
   Strummer liked post by lau lau On thread : I'm about to get another .223

   Also look at the mauser M18. Better factory trigger than a tikka and they shoot really well with factory ammo. Only downside is 1in10 twist so can't shoot the long heavies. But I run 55gr hornady...

   Liked On: 18-03-2025, 09:11 PM

4. 
   MyName_Jeff liked post by lau lau On thread : Rifle Availability

   Once you figure out what chambering you want, as the rifles are all the same. So can pick up for fit and feel. Just tell the shop what you want and it's normally there in a day or 2. Unless you're...

   Liked On: 11-03-2025, 08:03 AM

5. 
   Kelton liked post by lau lau On thread : Tikka t1x and begara bmr

   Had the bmr, sold it and got a tacsol semi. Nice accurate little rifle. Currently saving up for a left hand 22lr in either tikka tx1 or bergarra b14r

   Liked On: 24-02-2025, 08:49 PM

6. 
   veitnamcam liked post by lau lau On thread : It's called a carbine, not a bush pig.

   I've called my 18inch 7mm creedmoor the 7mmMidgetWhore, stamped on the barrel. Also have a 25inch comp version called the 7mmCreedWhore. Also stamped on the barrel and as far as I know the first of...

   Liked On: 20-02-2025, 04:42 PM

7. 
   dogmatix liked post by lau lau On thread : Precision rifle series NZ

   Was gonna concentrate on the SPARC 22 seriers, but will try male it to the PioPio shoot with either a 6 or 7mm

   Liked On: 17-02-2025, 07:28 AM

8. 
   inglishill liked post by lau lau On thread : Match bullets for hunting deer

   I've used 162gr amax and eld-m along with 169tmk in my 7mm08, 7mmcreed and 7mmRM with good results. 107gr smk in my 6XC 230gr berger hybrids and 230gr Atips in my 300PRC. All have taken game...

   Liked On: 07-02-2025, 02:22 PM

9. 
   Tuckerbox liked post by lau lau On thread : Precision rifle series NZ

   Was gonna concentrate on the SPARC 22 seriers, but will try male it to the PioPio shoot with either a 6 or 7mm

   Liked On: 26-01-2025, 11:37 AM

10. 
    Tuckerbox liked post by lau lau On thread : Survey of Scopes Used in Precision Rifle Competition in USA

    After reading that it just reaffirms my decision to purchases a ZCO527. Best scope I've ever looked through, solid and robust as well. Cheers lotto ��

    Liked On: 25-01-2025, 07:45 AM

11. 
    Mick Hunter liked post by lau lau On thread : Survey of Scopes Used in Precision Rifle Competition in USA

    After reading that it just reaffirms my decision to purchases a ZCO527. Best scope I've ever looked through, solid and robust as well. Cheers lotto ��

    Liked On: 23-01-2025, 09:01 AM

12. 
    John Duxbury liked post by lau lau On thread : 7mm08 loads and a short barrel

    I used the 162gr eld-m on fallow, reds and goats from a 18inch 7mm08 for years. Took animals from 10 meters out to 602 meters, was only doing 2530fps with 41gr 2208 but it just worked. The 162gr sst...

    Liked On: 16-01-2025, 09:07 AM

13. 
    Rock river arms hunter liked post by lau lau On thread : 180gr eld M from a 20" 284win

    I was using adi 2209 with the 162gr in my 18inch 284. Can't recall charge weight or velocity but it grouped OK and took more than a few deer and goats before I rebarreled it

    Liked On: 23-12-2024, 05:53 PM

14. 
    Gkp liked post by lau lau On thread : Ideal .308 barrel length.

    18inch is fine. I ran a 18inch 7mm08 with the 162gr eld-m @2530fps, knocked over more than a few goats and fallow from 10meters out to 602meters, 308 won't be any different with the right projectile

    Liked On: 20-12-2024, 02:18 PM

15. 
    Jaco Goosen liked post by lau lau On thread : 22 arc Tikka build

    It'll work. But I can think of better actions to start with. The Ruger American is one My 6arc is a howa 1500. With the bolt face sleeved down. Run mdt acis 6 arc mags, with no feed issues

    Liked On: 12-12-2024, 03:11 PM

Page 1 of 16 123456789101112131415 ... Last

• Jump to page: