LBD
Member

405 Likes

Page 5 of 27 First 12345678910111213141516171819 ... Last

• Jump to page:

1. 
   Trout liked post by LBD On thread : Cook Strait Ferry

   We would not be having this discussion if the maintenance procedures for the equipment and the condition monitoring and reliability engineering on the equipment needing to be replaced were all up to...

   Liked On: 16-12-2023, 06:30 AM

2. 
   Moa Hunter liked post by LBD On thread : What outboard to put on a dighy

   you do not need a tunnel, a tunnel is only required if you will boat in very skinny water, where it allows you to raise the motor some 75 to 100mm higher on the transom so that the jet intake is...

   Liked On: 23-10-2023, 10:18 AM

3. 
   Strummer liked post by LBD On thread : Naiad Inflatable

   In about 1983 when Steve Schmidt was developing the Naiad, he built a fibreglass plug to test the concept... 2.5m long with a 25hp. Steve would commute across Queen Charlotte Sound with it and tie...

   Liked On: 24-06-2023, 12:21 AM

4. 
   imaca liked post by LBD On thread : Naiad Inflatable

   In about 1983 when Steve Schmidt was developing the Naiad, he built a fibreglass plug to test the concept... 2.5m long with a 25hp. Steve would commute across Queen Charlotte Sound with it and tie...

   Liked On: 22-06-2023, 04:33 PM

5. 
   Fat belly Dog liked post by LBD On thread : Naiad Inflatable

   In about 1983 when Steve Schmidt was developing the Naiad, he built a fibreglass plug to test the concept... 2.5m long with a 25hp. Steve would commute across Queen Charlotte Sound with it and tie...

   Liked On: 22-06-2023, 12:58 PM

6. 
   XR500 liked post by LBD On thread : Naiad Inflatable

   In about 1983 when Steve Schmidt was developing the Naiad, he built a fibreglass plug to test the concept... 2.5m long with a 25hp. Steve would commute across Queen Charlotte Sound with it and tie...

   Liked On: 22-06-2023, 09:16 AM

7. 
   7mmsaum liked post by LBD On thread : Naiad Inflatable

   In about 1983 when Steve Schmidt was developing the Naiad, he built a fibreglass plug to test the concept... 2.5m long with a 25hp. Steve would commute across Queen Charlotte Sound with it and tie...

   Liked On: 22-06-2023, 06:14 AM

8. 
   Bol Tackshin liked post by LBD On thread : 300 PRC why hasnt it achieved greater popularity ?

   I shoot a close cousin , 300NM... I may be a bit of a wouse, that that size is as big as I would want to have... fun on steel out to 2k... but mine is heavy and not a hunting rifle... 300PRC in a...

   Liked On: 11-06-2023, 06:35 PM

9. 
   Knucks liked post by LBD On thread : whats needed when hunting the south island

   passport, current visa and up to date covid vaccination pass....

   Liked On: 31-05-2023, 07:23 AM

10. 
    Cyclops liked post by LBD On thread : whats needed when hunting the south island

    passport, current visa and up to date covid vaccination pass....

    Liked On: 30-05-2023, 03:46 PM

11. 
    lau lau liked post by LBD On thread : 300 PRC why hasnt it achieved greater popularity ?

    I shoot a close cousin , 300NM... I may be a bit of a wouse, that that size is as big as I would want to have... fun on steel out to 2k... but mine is heavy and not a hunting rifle... 300PRC in a...

    Liked On: 29-05-2023, 08:29 PM

12. 
    JT_NZ liked post by LBD On thread : 300 PRC why hasnt it achieved greater popularity ?

    I shoot a close cousin , 300NM... I may be a bit of a wouse, that that size is as big as I would want to have... fun on steel out to 2k... but mine is heavy and not a hunting rifle... 300PRC in a...

    Liked On: 29-05-2023, 07:41 PM

13. 
    Calvnz1 liked post by LBD On thread : Tumbler or Sonic cleaner

    Cannot say I agree, I de-prime, wet tumble, check primer seat is clean, dry then anneal, resize using a forster FL die with a honed neck, no need to drag an expander ball back through the neck, check...

    Liked On: 28-05-2023, 11:05 PM

14. 
    7mmsaum liked post by LBD On thread : Tumbler or Sonic cleaner

    Cannot say I agree, I de-prime, wet tumble, check primer seat is clean, dry then anneal, resize using a forster FL die with a honed neck, no need to drag an expander ball back through the neck, check...

    Liked On: 28-05-2023, 11:00 PM

15. 
    Calvnz1 liked post by LBD On thread : Tumbler or Sonic cleaner

    Tried both.... now use tumbler for cases and sonic for cleaning suppressor and other gun bits.

    Liked On: 28-05-2023, 10:36 PM

Page 5 of 27 First 12345678910111213141516171819 ... Last

• Jump to page: