m101a1
Member

578 Likes

Page 19 of 39 First ... 56789101112131415161718192021222324252627282930313233 ... Last

• Jump to page:

1. 
   m101a1 liked post by Pommy On thread : Projectile recommendations for .223

   Whatever you can get that is cheap. They are indeed all much of a muchness and you won't be able to tell the difference between a Hornady, a Speer, a Nosler, or a Sierra.

   Liked On: 23-11-2023, 12:13 PM

2. 
   m101a1 liked post by Rushy On thread : Auckland shooting club. Resource consent help

   I followed the link but it isn’t open until this Friday. My submission will simply say “Just let Raymond and Victoria build the world class shooting facility that they envisioned when they first...

   Liked On: 22-11-2023, 08:29 PM

3. 
   m101a1 liked post by blip On thread : Boat Trailer Maintenance Time

   A guy I know carries a spare hub with bearings seal and nut washer and split pin as well as a spare when ever hes going for some distance with his trailer. Seems like a good idea..

   Liked On: 21-11-2023, 09:52 PM

4. 
   m101a1 liked post by flock On thread : Priming Tool

   Lee auto bench priming tool

   Liked On: 19-11-2023, 08:47 PM

5. 
   m101a1 liked post by dvk-kp On thread : 4x4 accessories

   https://www.bunnings.co.nz/bahco-94-piece-1-4-1-2-combi-socket-set_p0679433 These are the shit, can do most mechanical stuff with it, I have a set of pliers too.

   Liked On: 17-11-2023, 07:17 PM

6. 
   m101a1 liked post by johnd On thread : Beginner reloader setup

   Just a thought on measuring devices such as verniers and scales, you will pay a premium price for any tool that is related to reloading companies. The same device without the name association will...

   Liked On: 17-11-2023, 04:43 PM

7. 
   m101a1 liked post by zimmer On thread : Beginner reloader setup

   In 57 years of handloading I have only ever had a one case stuck in a die. That was after 9-11 when aerosols and anything solvent based couldn't be shipped. I foolishly tried a water based spray...

   Liked On: 17-11-2023, 11:40 AM

8. 
   m101a1 liked post by Oldbloke On thread : Beginner reloader setup

   Yeh, all you need is RGB Lee dies. Lube, there is more BS in forums about lube than a cattle yard. Gear box oil, used it for years. Currently coco nut oil for 30.06 and 223. Works fine for FLSing....

   Liked On: 17-11-2023, 09:22 AM

9. 
   m101a1 liked post by Andygr On thread : Beginner reloader setup

   One thing I'd add to your list is a stuck case removal tool. :thumbsup:

   Liked On: 16-11-2023, 10:35 PM

10. 
    m101a1 liked post by Oldbloke On thread : Beginner reloader setup

    Agree. Any half decent dial caliper. Mine come from ebay. Beam balance is best, also consider Redding, im happy with mine. You can do without a trickler initially, just half fill a cartridge with...

    Liked On: 16-11-2023, 08:20 PM

11. 
    m101a1 liked post by RUMPY On thread : Found knife

    I think it goes both ways, I'd always try and find the owner of a found item hoping that if I ever lost anything it may find its way back to me.

    Liked On: 12-11-2023, 08:41 PM

12. 
    m101a1 liked post by Micky Duck On thread : Comparing the old with the new.

    I often wonder if the fellas who trade in a good n faithful wife ,the mother of thier kids and who was great homemake and no slouch between the sheets for some younger slimmer model with less sag and...

    Liked On: 10-11-2023, 08:15 PM

13. 
    m101a1 liked post by 308 On thread : Big gun safe advice

    It's an option to get a local fabricator to weld up a box out of 6mm steel and hang a door on with a couple of Ross 5 lever locks I made my own as a smaller unit and it cost, very roughly $300 per...

    Liked On: 10-11-2023, 09:14 AM

14. 
    m101a1 liked post by ROKTOY On thread : Big gun safe advice

    10ft Shipping container?

    Liked On: 10-11-2023, 09:13 AM

15. 
    m101a1 liked post by timattalon On thread : Goretex is a marketing gimmick

    I follow him on youtube. He has a lot of interesting vids especailly around motorbikes.....And being Canadian, tends to be more along the sort of things we do here...

    Liked On: 03-11-2023, 08:10 PM

Page 19 of 39 First ... 56789101112131415161718192021222324252627282930313233 ... Last

• Jump to page: