m101a1
Member

575 Likes

Page 7 of 39 First 123456789101112131415161718192021 ... Last

• Jump to page:

1. 
   m101a1 liked post by scotty On thread : Lead bullets and their risk to human health

   OSH and PPE were pretty much non existent in the panelbeating industry when i started , bog was a very new novelty item , what we couldnt hammer and file was leaded lead was also a staple for...

   Liked On: 23-10-2024, 09:07 PM

2. 
   m101a1 liked post by timattalon On thread : Advice on Installing a Gun Safe When Wall Nogs Don’t Align with Pre-Drilled Holes

   AO inspector looking at my safe started thumbing through thte paperwork on the clip board....then looked at the safe and asked me if I was supposed to have endorsement paperwork as there did not seem...

   Liked On: 22-10-2024, 08:50 AM

3. 
   m101a1 liked post by 308 On thread : Advice on Installing a Gun Safe When Wall Nogs Don’t Align with Pre-Drilled Holes

   Studs are one piece ceiling to floor, nogs are the horizontal bits nailed between that aren't as strongly fixed (usually) Tim's line "scrotum nuggets" is fucking beautiful 100mm tek screws with...

   Liked On: 21-10-2024, 08:04 PM

4. 
   m101a1 liked post by Kelton On thread : Advice on Installing a Gun Safe When Wall Nogs Don’t Align with Pre-Drilled Holes

   Anybody you know with a decent battery drill to drill new holes in the safe? That’s all I did

   Liked On: 21-10-2024, 07:10 PM

5. 
   m101a1 liked post by scotty On thread : Separate Ammo Compartment in a Safe

   logic and common sense is not in their arsenal dont even try to understand ....just bend over and say thankyou very much

   Liked On: 20-10-2024, 08:06 PM

6. 
   m101a1 liked post by scotty On thread : Separate Ammo Compartment in a Safe

   yup +1

   Liked On: 20-10-2024, 07:39 PM

7. 
   m101a1 liked post by Barry the hunter On thread : Winchester 1892 stock

   not bad wood on that I would take of that butt plate - make up crescent shaped spacer from a suitable piece of wood to level out the butt and a small thin recoil pad even a piece of solid rubber...

   Liked On: 20-10-2024, 01:56 PM

8. 
   m101a1 liked post by Shearer On thread : How close is too close! Objective bell to barrel.

   Looks fine to me.

   Liked On: 16-10-2024, 09:07 PM

9. 
   m101a1 liked post by bigbear On thread : Diesel hilux with 10L petrol in it?

   I thought the new ones come with AA road side assist, If so its a easy fix with a phone call

   Liked On: 13-10-2024, 09:00 PM

10. 
    m101a1 liked post by Tech On thread : Licence expiry - continuing validity

    At the recent Fishing,Hunting & 4x4 Expo in Rotorua I asked the FSA representative about renewing my firearms licence. He told me that as long as I submitted my completed application and paid the fee...

    Liked On: 12-10-2024, 07:01 PM

11. 
    m101a1 liked post by witchcraft On thread : Canam Spec tools

    Just did the same with amazon, bent the tool tying to get the primary off so looked on u tube, filled the hole with grease and then screwed in the pusher bolt, pops straight off, how did I manage...

    Liked On: 10-10-2024, 08:26 PM

12. 
    m101a1 liked post by Moutere On thread : Canam Spec tools

    No name Chinese start recoil. NZ $13 +$18 courier. Temu $2.78 delivered. Bought both and they’re indistinguishable from each other.

    Liked On: 10-10-2024, 08:26 PM

13. 
    m101a1 liked post by Maca49 On thread : Crackdown in Wairarapa

    Geeze things have changed, gone are the days we would shoot opossums off power poles in town. The good old Wairarapa coming up to speed.

    Liked On: 08-10-2024, 09:50 PM

14. 
    m101a1 liked post by XR500 On thread : At least someone's taking it seriously

    https://www.nzherald.co.nz/nz/christchurch-terror-attack-coroner-probes-how-gunman-obtained-firearms-licence/44VFYWO5HRDIFPOCZ5QKYZZNWE/ Deputy Chief Coroner Brigitte Windley said the coronial...

    Liked On: 08-10-2024, 06:24 PM

15. 
    m101a1 liked post by Allgood On thread : Firearms Safety Authority: Firearms Data & Public Information

    1.My FAL was renewed a month before the register came into being....I am not legally obliged to register my firearms until 2028. I dont have any need to purchase any more firearms as my needs are...

    Liked On: 07-10-2024, 08:58 PM

Page 7 of 39 First 123456789101112131415161718192021 ... Last

• Jump to page: