makka
Member

459 Likes

Page 13 of 31 First 123456789101112131415161718192021222324252627 ... Last

• Jump to page:

1. 
   Mooseman liked post by makka On thread : 5.6x57 single shot project

   There was plenty of surface rust on the action and remains of the shotgun barrel so I was going to paint the metalwork with black etch primer, but decided to give cold blueing a go. Stripped and...

   Liked On: 26-07-2024, 07:44 PM

2. 
   Frogfeatures liked post by makka On thread : 5.6x57 single shot project

   There was plenty of surface rust on the action and remains of the shotgun barrel so I was going to paint the metalwork with black etch primer, but decided to give cold blueing a go. Stripped and...

   Liked On: 26-07-2024, 06:53 PM

3. 
   Husky1600#2 liked post by makka On thread : 5.6x57 single shot project

   There was plenty of surface rust on the action and remains of the shotgun barrel so I was going to paint the metalwork with black etch primer, but decided to give cold blueing a go. Stripped and...

   Liked On: 26-07-2024, 12:04 PM

4. 
   buzzmann liked post by makka On thread : Real or fake?

   I'd say fake, but a pic of the mag adjustment will tell you for sure, they go the opposite way to a real one

   Liked On: 17-07-2024, 06:37 PM

5. 
   SixtyTen liked post by makka On thread : 5.6x57 single shot project

   Weight and balance, balance is pretty good. The balance point is right at the rear of the foregrip as most of they weight in those Baikals is in the action. The weight with the rail but no...

   Liked On: 13-07-2024, 01:56 PM

6. 
   2post liked post by makka On thread : Hybrid vs petrol - surprising outcome

   Hybrids certainly lose their advantage when you start doing a bit of open road driving. I did a wof on a Prius the other day, had 830,000km on the clock!

   Liked On: 27-06-2024, 09:14 PM

7. 
   Scott Cowan liked post by makka On thread : Sako 75 Carbon stock build

   Looks great mate, I like the finish too

   Liked On: 26-06-2024, 10:29 PM

8. 
   Joe_90 liked post by makka On thread : 5.6x57 single shot project

   Firing pin done, we did both bushes and firing pins while we had everything setup. 253303 Did a quick test on a primed case and got a much more acceptable result, even managed to hit the centre...

   Liked On: 24-06-2024, 09:27 PM

9. 
   Ross Nolan liked post by makka On thread : 5.6x57 single shot project

   Firing pin done, we did both bushes and firing pins while we had everything setup. 253303 Did a quick test on a primed case and got a much more acceptable result, even managed to hit the centre...

   Liked On: 24-06-2024, 02:53 PM

10. 
    Fssprecision liked post by makka On thread : 5.6x57 single shot project

    Firing pin done, we did both bushes and firing pins while we had everything setup. 253303 Did a quick test on a primed case and got a much more acceptable result, even managed to hit the centre...

    Liked On: 24-06-2024, 09:29 AM

11. 
    Hook_Grass liked post by makka On thread : 5.6x57 single shot project

    Firing pin done, we did both bushes and firing pins while we had everything setup. 253303 Did a quick test on a primed case and got a much more acceptable result, even managed to hit the centre...

    Liked On: 23-06-2024, 08:23 PM

12. 
    Micky Duck liked post by makka On thread : 5.6x57 single shot project

    Firing pin done, we did both bushes and firing pins while we had everything setup. 253303 Did a quick test on a primed case and got a much more acceptable result, even managed to hit the centre...

    Liked On: 23-06-2024, 06:55 PM

13. 
    Micky Duck liked post by makka On thread : 5.6x57 single shot project

    A little bit more work tonight. We got the bush almost done, drilled and tapped the old firing pin hole to take a lightly countersunk M4. Now I just need to file the remains of the screw down...

    Liked On: 23-06-2024, 06:55 PM

14. 
    Husky1600#2 liked post by makka On thread : 5.6x57 single shot project

    Firing pin done, we did both bushes and firing pins while we had everything setup. 253303 Did a quick test on a primed case and got a much more acceptable result, even managed to hit the centre...

    Liked On: 23-06-2024, 06:05 PM

15. 
    Synthetic liked post by makka On thread : Walnut and blued steel,

    Looks like there is plenty of room for that bolt handle to be reshaped to clear the scope

    Liked On: 22-06-2024, 09:45 PM

Page 13 of 31 First 123456789101112131415161718192021222324252627 ... Last

• Jump to page: