Marton
Member

9 Likes

1. 
   Growlybear liked post by Marton On thread : CCI .22 LR Suppressor 45gr Hollow Point

   I’ve used a couple of bricks of the CCI Subs, no problem with them. Cycled in my 10/22 with no issue.

   Liked On: 20-03-2025, 06:13 PM

2. 
   rupert liked post by Marton On thread : 25-20 60 grain and NZ available powders

   Redding make a 25-20 trim & forming die that apparently is a useful step between 32-20 and a full size 25-20 die. I thought about getting one to convert 32-20 to 218 Bee, as a mid point to neck it...

   Liked On: 11-10-2024, 11:14 PM

3. 
   bluecod1967 liked post by Marton On thread : 22 hornet load worked a treat

   I use Lil’gun for my 218 Bee. Similar load as your Hornet, 12.5gn with a SP primer. I mainly use 40gn V-Max projectiles. Lil’gun is a bit fine and it can leak through the side of my Lee powder...

   Liked On: 12-09-2023, 11:11 PM

4. 
   Oldbloke liked post by Marton On thread : Lee loader kit

   I have a .223 one that was 2nd-hand when I bought it 30 something years ago. It’s the target model having an inside neck reamer and trimmer. It also has the old school Lee priming tool, these had a...

   Liked On: 01-07-2023, 12:42 AM

5. 
   bumblefoot liked post by Marton On thread : Lee loader kit

   I have a .223 one that was 2nd-hand when I bought it 30 something years ago. It’s the target model having an inside neck reamer and trimmer. It also has the old school Lee priming tool, these had a...

   Liked On: 29-06-2023, 08:07 PM

6. 
   woods223 liked post by Marton On thread : Lee loader kit

   I have a .223 one that was 2nd-hand when I bought it 30 something years ago. It’s the target model having an inside neck reamer and trimmer. It also has the old school Lee priming tool, these had a...

   Liked On: 29-06-2023, 07:44 PM

7. 
   Micky Duck liked post by Marton On thread : Lee loader kit

   I have a .223 one that was 2nd-hand when I bought it 30 something years ago. It’s the target model having an inside neck reamer and trimmer. It also has the old school Lee priming tool, these had a...

   Liked On: 29-06-2023, 07:29 PM

8. 
   Kiwinomad liked post by Marton On thread : Thompson Encore 300 Blackout

   Did you organise the MGM barrel from here? I was getting one for my Contender from them just as Covid locked us down. The local agent folded nothing arrived and my deposit lost. Might try again if...

   Liked On: 25-11-2022, 08:21 PM

9. 
   Micky Duck liked post by Marton On thread : Combo guns,

   I once had a Savage combination gun, 20g and 22mag rim fire. I mounted a Tasco 1.5-4 power scope on it. On 1.5 magnification shooting the shotgun with both eyes open was OK, it sort of disappeared in...

   Liked On: 09-11-2022, 08:15 PM