Marty Henry
Member

5128 Likes

Page 82 of 342 First ... 326869707172737475767778798081828384858687888990919293949596132182 ... Last

• Jump to page:

1. 
   Micky Duck liked post by Marty Henry On thread : clay trap, correct way to throw doubles?

   Yes, we gave a couple of old hand cranked traps that work that way. The clip is a bit confusing it probably positions a clay for straight away but might cause breakages with two. Try removing it and...

   Liked On: 10-04-2023, 07:52 PM

2. 
   Micky Duck liked post by Marty Henry On thread : clay trap, correct way to throw doubles?

   Place one target normally and the other at the front of the throwing arm that should work

   Liked On: 10-04-2023, 07:42 PM

3. 
   erniec liked post by Marty Henry On thread : Long time shooter.. virgin reloader looking for advice

   Agree the Lee stuff pushes out excellent ammunition. It might not be as flash looking as other makes but it works. The only thing that's really not up to speed are the scales as their not...

   Liked On: 09-04-2023, 02:14 PM

4. 
   ZQLewis liked post by Marty Henry On thread : Muzzle Velocity Loss Across Different Ammo

   You need either a chrony or a longer range, the box data is for a test barrel typically over 24 inches long and won't be relevant. How far do you intend shooting? 3 inches high at 100 would be a good...

   Liked On: 07-04-2023, 12:34 AM

5. 
   RV1 liked post by Marty Henry On thread : Muzzle Velocity Loss Across Different Ammo

   You need either a chrony or a longer range, the box data is for a test barrel typically over 24 inches long and won't be relevant. How far do you intend shooting? 3 inches high at 100 would be a good...

   Liked On: 06-04-2023, 01:46 PM

6. 
   Micky Duck liked post by Marty Henry On thread : Muzzle Velocity Loss Across Different Ammo

   You need either a chrony or a longer range, the box data is for a test barrel typically over 24 inches long and won't be relevant. How far do you intend shooting? 3 inches high at 100 would be a good...

   Liked On: 04-04-2023, 05:51 PM

7. 
   NAKED_GOOSE liked post by Marty Henry On thread : 308 Subsonic powder alternative to Trailboss

   Unique 8 grains

   Liked On: 04-04-2023, 10:36 AM

8. 
   caberslash liked post by Marty Henry On thread : Powder Scale Options

   A beam scale with magnetic damping can't be beat unless you intend loading hundreds of the same thing then a powder thrower calibrated with the aforesaid beam can't be beat. Both run on gravity, mass...

   Liked On: 30-03-2023, 10:19 PM

9. 
   Bryan liked post by Marty Henry On thread : Powder Scale Options

   A beam scale with magnetic damping can't be beat unless you intend loading hundreds of the same thing then a powder thrower calibrated with the aforesaid beam can't be beat. Both run on gravity, mass...

   Liked On: 30-03-2023, 01:50 PM

10. 
    RV1 liked post by Marty Henry On thread : Powder Scale Options

    A beam scale with magnetic damping can't be beat unless you intend loading hundreds of the same thing then a powder thrower calibrated with the aforesaid beam can't be beat. Both run on gravity, mass...

    Liked On: 30-03-2023, 12:40 PM

11. 
    308 liked post by Marty Henry On thread : .303 rifle recoil, sore shoulder

    Brass, steel or alloy butt plates can be a bit thumpy if you don't pull them tight into the shoulder, a short stocked gun kicks a full size shooter more than a correct fit does, 303s came in short...

    Liked On: 29-03-2023, 07:59 PM

12. 
    Oldbloke liked post by Marty Henry On thread : Powder Scale Options

    A beam scale with magnetic damping can't be beat unless you intend loading hundreds of the same thing then a powder thrower calibrated with the aforesaid beam can't be beat. Both run on gravity, mass...

    Liked On: 29-03-2023, 04:03 PM

13. 
    Micky Duck liked post by Marty Henry On thread : Powder Scale Options

    A beam scale with magnetic damping can't be beat unless you intend loading hundreds of the same thing then a powder thrower calibrated with the aforesaid beam can't be beat. Both run on gravity, mass...

    Liked On: 29-03-2023, 02:11 PM

14. 
    Micky Duck liked post by Marty Henry On thread : The future of Rifle Ranges.

    In the form "application for certification of a shooting range" in section I item 1 is "I declare that all the information is true and correct" item 2 is"I declare I have the necessary territorial...

    Liked On: 27-03-2023, 12:37 PM

15. 
    Eat Meater liked post by Marty Henry On thread : .303 rifle recoil, sore shoulder

    Brass, steel or alloy butt plates can be a bit thumpy if you don't pull them tight into the shoulder, a short stocked gun kicks a full size shooter more than a correct fit does, 303s came in short...

    Liked On: 25-03-2023, 08:40 PM

Page 82 of 342 First ... 326869707172737475767778798081828384858687888990919293949596132182 ... Last

• Jump to page: