Mathias
Member

7760 Likes

Page 260 of 518 First ... 160210246247248249250251252253254255256257258259260261262263264265266267268269270271272273274310360 ... Last

• Jump to page:

1. 
   Mathias liked post by Wingman On thread : .30BR Rem 788 Chassis build

   Then it was on to chambering it in the mighty .30BR. For my past builds I used a 7mm Rem BR reamer and finished it with a .308 neck and throat reamer which always ended up with quite a long...

   Liked On: 17-04-2020, 10:44 AM

2. 
   Mathias liked post by McNotty On thread : Walnut and blued steel,

   The old man got lucky years ago, shitty old Parker Hale and a broken pump action shottie got stolen when our house got burgled. Ended up with this beautiful Sako .270 from insurance. Always remember...

   Liked On: 17-04-2020, 10:37 AM

3. 
   Mathias liked post by Nugget connaisseur On thread : RECOIL....your funny stories.

   The TSSA held there big bore shoot last year. I cant member the form members names but shot one guys 458win mag. Wasnt as bad as i thought. Then at the end of the day the owner of the 505 gibs was...

   Liked On: 16-04-2020, 09:07 PM

4. 
   Mathias liked post by Flyblown On thread : Updated powder burn rate table

   Pilfered from another forum, this table includes a bunch of the new powders that aren’t included in the one’s I’ve been using up to now. Might be useful for some of you fellas.

   Liked On: 16-04-2020, 08:55 PM

5. 
   Mathias liked post by Friwi On thread : 6x45 Rem barrel

   It has that 416 Rigby look :-)

   Liked On: 16-04-2020, 08:41 PM

6. 
   Mathias liked post by tikka On thread : Semi-fat bikes (27.5+)

   I'm using an old school Surly Pugsley with 26x3.8 tyres I ride on everything with a fully load pack , I find it easy on all terrain and glides over easier than the thin tyres. the end of a good...

   Liked On: 16-04-2020, 06:00 PM

7. 
   Mathias liked post by Stocky On thread : 2020 SHOT STAGS

   Friend of a friend here is redacted photo. I saw a score sheet going to 397 I believe. 136487

   Liked On: 16-04-2020, 04:44 PM

8. 
   Mathias liked post by Husky1600 On thread : vx5hd vx vx6hd

   I've used a heap of Weaver scopes over the years, excellent scope for the money. And as I got older I listened to a wise mate of mine and now have a few Kahles, excellent scopes, full stop. But about...

   Liked On: 16-04-2020, 03:48 PM

9. 
   Mathias liked post by quadhunter260 On thread : 6x45 Rem barrel

   Mathias bloody hell that looks like a load for rampaging rodents up close 😁😂

   Liked On: 16-04-2020, 02:04 PM

10. 
    Mathias liked post by Wingman On thread : .30BR Rem 788 Chassis build

    So onto the build. The donor rifle was a 1967 shot out cut down iconic Remington 788. the barrel was rough but the rest of the rifle was quite tidy. https://i.ibb.co/vJg7Snh/788.jpg...

    Liked On: 16-04-2020, 02:03 PM

11. 
    Mathias liked post by Wingman On thread : .30BR Rem 788 Chassis build

    .30BR Rem 788 Chassis build I put this rifle together some time ago but never did a build thread for it. Lock down has given me a tiny bit of time to do so now so here goes… Over the past 20...

    Liked On: 16-04-2020, 01:57 PM

12. 
    Mathias liked post by takbok On thread : 6x45 Rem barrel

    I use the 62gr GSC copper monolithics @3350fps for deer in my 6x45 - very effective! (25.5gr Reloder 7, CCI450 primers)

    Liked On: 16-04-2020, 10:01 AM

13. 
    Mathias liked post by takbok On thread : 6x45 Rem barrel

    I've shot the 105gr A-max in my 1:8 6x45, 2.360" OAL to fit my Sako 75 magazine. I was getting just over 2500fps. Did the job on one deer until I switched to 62gr copper bullets. I've also tried...

    Liked On: 16-04-2020, 10:00 AM

14. 
    Mathias liked post by MSL On thread : Best Trophy’s from previous roars

    https://uploads.tapatalk-cdn.com/20200415/f54edbab1886002bad160d15310f41b5.jpg Sent from my iPhone using Tapatalk

    Liked On: 16-04-2020, 09:51 AM

15. 
    Mathias liked post by 7mmsaum On thread : What's considered "lightweight "

    Anything made by Melvin Forbes

    Liked On: 15-04-2020, 04:40 PM

Page 260 of 518 First ... 160210246247248249250251252253254255256257258259260261262263264265266267268269270271272273274310360 ... Last

• Jump to page: