A nice white boy 253630 Has since been shot by the ol man scored 233 5/8ds
Liked On: 27-06-2024, 08:53 PM
I had the opportunity to get out for a cheeky day hunt popping wallabies and I took it. It’s been an age since I have gotten out due to work and child commitments, so I was looong overdue! After...
Liked On: 27-06-2024, 01:34 PM
Youngest is 8. Oldest is 16. They are both very much outdoor enthusiasts. Will be a challange for them tho in different ways. No wifi for the oldest [emoji3][emoji3]..and the young fella will...
Liked On: 27-06-2024, 09:19 AM
Not long now [emoji106] Its taken ALOT of planning and organising but only a few sleeps left....... https://uploads.tapatalk-cdn.com/20240626/49b8122f8670d832c07e0d10c8645cea.jpg Camp sites...
Liked On: 27-06-2024, 09:19 AM
The simple method. Using the same bullet (80 ELDM) but different brass (Ammo Inc) and powder (2206h). Load 20rd at book max, some misc distance off the lands. 10 shots at 100m, 20mm. Good. 1...
Liked On: 24-06-2024, 09:39 PM
Simply Springs in Hastings can supply and or make all sorts of springs such as magazine springs and even extractor collar springs for Mausers etc. They are very reasonably priced. phone number is...
Liked On: 24-06-2024, 07:06 PM
The gun gods finally shone their light on the Catlins and timing was perfect. Not a breath of wind and a stunning winter day. I’ve had my first reloads ready for months so set up in the paddock over...
Liked On: 23-06-2024, 09:31 AM
Spits on. 253200
Liked On: 22-06-2024, 04:16 PM
253211
Liked On: 22-06-2024, 04:16 PM
Last night. 250 yards. 74 grn Targex. https://youtu.be/0kZFkwK45AU
Liked On: 22-06-2024, 11:48 AM
Get Talley lows any higher and you will need a cheek riser Sent from my CPH2531 using Tapatalk
Liked On: 22-06-2024, 10:19 AM
I'd be more worried about the aparrent "skid marks" on the seat, is it that scarey to drive the beast 😁
Liked On: 21-06-2024, 07:41 PM
Under most circumstances a softer bullet kills better than a harder bullet.
Liked On: 21-06-2024, 02:57 PM
Definitely a hybrid :P
Liked On: 21-06-2024, 11:06 AM
A little bit more work tonight. We got the bush almost done, drilled and tapped the old firing pin hole to take a lightly countersunk M4. Now I just need to file the remains of the screw down...
Liked On: 21-06-2024, 08:25 AM