micknz
Member

6 Likes

1. 
   micknz liked post by mikee On thread : 308 and monolithic

   Maker Trex 168gn in my short barreled 308. Great performance so far. 2 for 2. found petals which break off and razor sharp but never the rear solid section. Inside the chest looked like a hand...

   Liked On: 04-08-2024, 09:49 AM

2. 
   micknz liked post by Bobba On thread : 308 and monolithic

   Barnes130g ttsx has never let me down in 308.

   Liked On: 04-08-2024, 09:48 AM

3. 
   micknz liked post by matto1234 On thread : berger 156gr eol and 6.5prc

   60gr h1000 in hornady brass fed 210 give 2960 in my christensen 24inch es 9 coal 77mm 59.8gr in my mates 20inch tikka gets 2850 Es of 3 coal 77mm

   Liked On: 23-01-2024, 07:03 PM

4. 
   micknz liked post by 6.5 CRD On thread : berger 156gr eol and 6.5prc

   I use them in my Tikka 6.5 PRC. Lapua Brass, FED 215 Primer. 2.301 BTO 59gr ADI2217 - 2930fps AVG (Getting pretty warm, 59.5gr gave me a light ejector stamp on 3rd shot.) 58gr RL26 - 3012fps...

   Liked On: 23-01-2024, 07:03 PM

5. 
   micknz liked post by Kelton On thread : 6.5 PRC - What's everyone doing reloading wise?

   micknz dont mix your brass when it comes time to reloading id choose norma if you have enough but hornady seems to go well in 6.5prc . The 143 eldx will do what your after . 2225 is the same as...

   Liked On: 25-08-2023, 08:02 AM

6. 
   micknz liked post by Roarless20 On thread : 6.5 PRC - What's everyone doing reloading wise?

   Hi micknz, Your factory ammo is capable of 5-600m kills. The most important thing you actually need to do is shoot your setup at those ranges to make sure it is shooting "on the money" and gain...

   Liked On: 25-08-2023, 08:02 AM