Micky Duck
Member

44874 Likes

Page 2633 of 2992 First ... 16332133253325832619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726832733 ... Last

• Jump to page:

1. 
   Micky Duck liked post by grandpamac On thread : Different brass strength between batches?

   Greetings Again, Just checked some of my old load data. The load of 44.5 grains of AR2209 for the 90 grain Speer for 3,185 fps appears in the November 2000 ADI Guide. This is before the increase in...

   Liked On: 27-07-2020, 08:32 PM

2. 
   Micky Duck liked post by grandpamac On thread : Different brass strength between batches?

   Greetings Larry Goat, Yes that one on the right is way too hot and I suspect the middle one is as well. The Hornady 90 grain ELDX is a long pointy projectile and the Hodgdon/ ADI data is worked up...

   Liked On: 27-07-2020, 08:32 PM

3. 
   Micky Duck liked post by Happy Jack On thread : Sharpening a chisel

   I sharpen my working chisels with a slightly shallower angle and always by hand on my oilstone as I have done for 30 years. That is a good looking finish though.

   Liked On: 27-07-2020, 08:25 PM

4. 
   Micky Duck liked post by Shelley On thread : Sharpening a chisel

   So the other day, at the flea markets I picked up an old rusted chisel, it was $2, too rusted to see the brand name. I took it home, cleaned it up, got most of the paint and rust off and it turns...

   Liked On: 27-07-2020, 08:25 PM

5. 
   Micky Duck liked post by Cordite On thread : Forms of protest

   Problem is... if 200 hunters started phoning different places then you be sure someone will construe they are being threatened and we will be slandered and libeled for it, after all we are scary guys...

   Liked On: 27-07-2020, 08:20 PM

6. 
   Micky Duck liked post by On thread : how far do deer run

   At least your out there getting and seeing more than some of us

   Liked On: 27-07-2020, 08:18 PM

7. 
   Micky Duck liked post by stingray On thread : Boating accident...............Not good

   A huge thank you to those that have being in touch to check up on me and my kin, we are all safe and well! Thank you all A tragic accident and I have no more details than what is in the media, it...

   Liked On: 27-07-2020, 08:16 PM

8. 
   Micky Duck liked post by Maca49 On thread : Boating accident...............Not good

   I still have shivers from doing a stupid thing as the new owner of a boat, following in my mates wake, with his son and mine sitting on the back of his the boat, legs over facing me. Not going all...

   Liked On: 27-07-2020, 08:15 PM

9. 
   Micky Duck liked post by Rushy On thread : Boating accident...............Not good

   It is never good mikee. I was involved in a high speed crash between boats that ended in the death of one person on my eighteen foot rubber inflatable boat (as we were lower in the water, the other...

   Liked On: 27-07-2020, 08:15 PM

10. 
    Micky Duck liked post by Lentil On thread : One for the ole .243 part 2

    146033

    Liked On: 27-07-2020, 07:43 PM

11. 
    Micky Duck liked post by grandpamac On thread : One for the ole .243 part 2

    Greetings 30late, We all need to remember that the older cartridges still work just as well, or better due to improved projectiles, as they ever did. This is in spite of any later development of new...

    Liked On: 27-07-2020, 07:43 PM

12. 
    Micky Duck liked post by 30late On thread : One for the ole .243 part 2

    Having a few computer issues but ill carry on regardless. That rifle in my earlier post is my ole Ruger m77 243 that i bought when i was about 20yrs old so that is 43 yrs ago, it has been largely...

    Liked On: 27-07-2020, 07:42 PM

13. 
    Micky Duck liked post by 30late On thread : One for the ole .243

    yes MD just having some computer issues, stand by

    Liked On: 27-07-2020, 07:29 PM

14. 
    Micky Duck liked post by grandpamac On thread : The original WTF bullet? Wow.

    Greetings All, First projectile I ever loaded was the Norma .303 soft point semi pointed boat tail. These were, I believe, soft steel jacketed and cupro nickel plated. They cost $10.50 for a box of...

    Liked On: 27-07-2020, 07:28 PM

15. 
    Micky Duck liked post by Dama dama On thread : Trapping.

    Get that trap bedded man, you'll get a lot less escapes. How close you get the trap to the tree and how much lure you use is a personal thing. The hand width from tree and lure up to approx...

    Liked On: 27-07-2020, 07:22 PM

Page 2633 of 2992 First ... 16332133253325832619262026212622262326242625262626272628262926302631263226332634263526362637263826392640264126422643264426452646264726832733 ... Last

• Jump to page: