mickey Duck there fixed it for ya. I'm sure they do
Liked On: 11-11-2018, 02:24 PM
I have a 308 in both 16 and 18 inch and they both kill stuff just fine. My advice would be not to shorten at all and see if you like it the way it is. You can always shorten at a later date(a...
Liked On: 11-11-2018, 02:23 PM
It took me a while to get into suppressors. Now that I’ve done it I don’t regret it. I don’t believe it’s a fad it has useful applications. It’s not for everybody but it’s not a fad either. Only...
Liked On: 11-11-2018, 02:23 PM
A few things to note: 1. A suppressor will still not eliminate hearing damage. Depending on the cartridge etc a suppressed rifle will still be around 130-140db. Hearing damage starts at even 85db...
Liked On: 11-11-2018, 01:21 PM
as above, Trailboss and the heaviest bullet you can get. 243 with 8gr TB and 105gr is just subsonic but I'm not comfortable shooting with a case thats only 60% full so did not continue. (OK...
Liked On: 11-11-2018, 10:12 AM
Oh and reading further, the primer can pop the projectile out (thus reducing pressure) then the powder pressure builds causing a spike and boom!
Liked On: 11-11-2018, 08:50 AM
Ok it seems the danger of using w296 is squibs from inconsistent burn. It's not the initial shot fired, it's the firing into a sqib. Using good primers (I've used CCI Magnum pistol) and good crimps...
Liked On: 11-11-2018, 08:50 AM
Hi MD I now have a 200 grain HP .30 cal mould can do FP and cup points as well, It has taken me a while to learn how to drive the bastard it's very temperamental
Liked On: 10-11-2018, 03:54 PM
Boat tail designs were invented to stop me swearing while trying to balance flat base projectiles on cases and having them fall off. This problem is made even worse with smaller diameter cartridges....
Liked On: 10-11-2018, 03:53 PM
Interestingly, the shitty old lee powder dispenser is metering perfectly on W296 unlike with AP70N. I'm impressed.
Liked On: 10-11-2018, 03:46 PM
Thanks Micky, I'm using the yellow spoons as we speak :D
Liked On: 10-11-2018, 03:46 PM
With a 14" barrel you'll be limited to a little over 2400 ft/sec with a 150gr bullet and AR2208 anyway. I'm not sure that changing either the bullet, powder, or quantity of powder is such a good...
Liked On: 10-11-2018, 12:59 PM
Thankfully Im sitting down as I write this, I must agree with Systolic on this. Lyman, rcbs etc all make excellent dies. Lee dies are in my experience every bit as good at half the price.
Liked On: 10-11-2018, 12:51 PM
Micky Duck thanks for that, ill give some a try too.. I selected SR primers after following the trends in USA forums who are reloading TCM pistols but I guess I wont know if I dont try..
Liked On: 10-11-2018, 12:42 PM
WillB, the Sierra ProHunter 150gr (2130) and 180gr (2150) have both been excellent for me. I’ve gone back to the 180gr recently and can’t really work out why I stopped using it in the first place,...
Liked On: 10-11-2018, 12:37 PM