Amateur... :)
Liked On: 08-01-2019, 07:28 AM
Light layers every time except in the coldest of conditions. This is primarily for N Island hunting, but even in August in the South the simple clothing system I use has worked very well. Even in...
Liked On: 07-01-2019, 08:01 PM
Stop drilling out flash holes and there is no need for Magnum primers you are not tried to ignite coal, If standard primers will ignite 46.00 grains of 2206H why won't they work with Trail Boss...
Liked On: 07-01-2019, 08:01 PM
Magnus Includes explanation why neck-sizing-only is good idea for .303s (note, you can also achieve NSO with a press using a neck-sizer die). Enjoy. https://www.youtube.com/watch?v=3TAHq2zKqS0
Liked On: 07-01-2019, 07:18 PM
Mate, you can reload with a Lee Loader, primers, powder and projectiles, and the loads will be as good, or better, than factory loads. Google Lee Loader, have a look at what it can do, and if you...
Liked On: 07-01-2019, 07:18 PM
I can feel myself moving exponentially closer to blowing myself up.
Liked On: 07-01-2019, 07:13 PM
Cooper I assume it is a .308? If so, then sounds like the 1:11” twist is not fast enough to stabilise the longer 200gr bullet. shooternz’s 151gr bullets are specifically designed for .308.
Liked On: 07-01-2019, 07:11 PM
A couple of pictures attached. 102223 102222
Liked On: 06-01-2019, 01:33 PM
I grew up shooting a 243 with 100gr federal power shok soft points. Performed flawlessly and always dropped deer consistently upto big stags. Also shot a few with 80gr soft points no worries. A mate...
Liked On: 06-01-2019, 11:55 AM
As I was in the middle of the four hour carry out, with a nice hot breeze and heavy pack, I did ask myself. Why am I hunting this time of year? It’s been a few years since I’ve been in to the...
Liked On: 06-01-2019, 10:01 AM
Na. Haven't had a powder spill that I can remember but I tend to find primers, tumbling media and projectiles and other essential reloading stuff where it shouldn't be. Sent from my SM-G965F...
Liked On: 06-01-2019, 09:50 AM
Light a match VC. It’ll be gone in a flash! Ha ha ha ha
Liked On: 06-01-2019, 09:50 AM
Years ago Graeme Omlo wrote an article about the .243 for Rod and Rifle. He tried a number of projectiles, but he reckoned none worked better than the Hornady 87gr spire point.
Liked On: 06-01-2019, 09:28 AM
If it comes down to it someone like Twin Needle can probably replace the floor with new material.
Liked On: 06-01-2019, 08:56 AM
I’ve seen worse guns threaded mate like very rare collectors items If you want to suppress it go for it One thing you could do my mate had it done with his marlin 44mag He had it threaded which...
Liked On: 06-01-2019, 08:36 AM