Nearly been caught myself with Berdan primed brass. If you suspect any like that in future shine torch down the case neck first to check the flash hole / s in the bottom of the case. Two holes is...
Liked On: 21-02-2024, 01:16 PM
Yep the 5 7.62 are Berdan, brass was actually a though smaller to the neck than ones fired in my rifle. Been to see another member this evening and have a much better grasp. Thanks for everyone's...
Liked On: 21-02-2024, 01:16 PM
I wanted to be able to display my suppressed 410s at various country shows though more and more we are finding no guns are allowed, so to cut a long story short I got a guy to model the receiver and...
Liked On: 21-02-2024, 01:13 PM
Vintage ? I’m still using that stuff on rabbits :)
Liked On: 20-02-2024, 07:46 PM
I got them second hand, no idea how old they are and have sourced a replacement die the one that I need. Hoping that the main body can be retapped will know later. When double checking I found out of...
Liked On: 20-02-2024, 07:00 PM
Greetings, Those scopes look pretty basic compared with what is available today. There is no doubt that there is a lot of flash kit available now that was not 12 years ago but how much of it fills...
Liked On: 20-02-2024, 06:32 PM
Go to the wrecker and cut the male off two seat belts and plug these in on the farm.
Liked On: 20-02-2024, 06:01 PM
try this ign on sit in seat wait for seatbelt lite to go out plug in 4x in 10 seconds wait till lite stops flashing should be disabled same for passenger x fb site
Liked On: 20-02-2024, 06:01 PM
I agree in part with above - if you’re not on a public track and in an area with good sign then at least have the rifle in your hands with a full magazine, you never know when and where a handy...
Liked On: 20-02-2024, 05:58 PM
Good effort on stripping the thread! Most of the lee stuff is built to be idiot proof. Obviously a faulty unit, contact Lee for a replacement. I once split an RCBS trim die when resizing mil surp...
Liked On: 20-02-2024, 05:42 PM
The good old rem mag is hard to beat haha. Definitely will be tempted on a 7 PRC if they come out in a good affordable factory platform but I’m pretty happy with my 7mm SAUM - things a laser and...
Liked On: 20-02-2024, 01:01 PM
Greetings, I think that data is for the .222 Rem Mag and not the .222 Rem. ADI shows a max load of 19.5 grains of AR2207 for 3,017 fps at 45,300 CUP for the .222 Rem. Regards Grandpamac.
Liked On: 20-02-2024, 10:58 AM
Spot on GPM Just last week I ran a ladder with 2207 up to 19.5 for 2976fps in .222 CZ 20” Cheers MG
Liked On: 20-02-2024, 10:58 AM
Some cleaver bugger made this for me to boil out my 303 barrels. A few old cases, cut and solded then to create the right angle, a old silicone funnel and hose clamp. Really handy, collapsible when...
Liked On: 20-02-2024, 09:18 AM
Nice hunting area,walk AROUND it if possible,not up thru the middle.Youl scent up the area as well.Sit high on top and watch down on it as the thermal heat rise.Youl spot yr animals befor they see or...
Liked On: 20-02-2024, 09:03 AM