https://uploads.tapatalk-cdn.com/20230820/c596c4a8d983cf2de31c08f2152cb4be.jpg Sent from my iPad using Tapatalk
Liked On: 20-08-2023, 03:21 PM
First up..... buy him a good book on knife sharpening. No one can sharpen anything until they know how :thumbsup: 231552
Liked On: 20-08-2023, 03:19 PM
That's a really cool conversion to do to minimise the sticky outy bits of your pack for crawling through the bush.:thumbsup: I never throw away old fleece gear, can always convert it to something...
Liked On: 20-08-2023, 12:32 PM
Carnuba car wax is what I used to use.
Liked On: 20-08-2023, 12:28 PM
I need to send this video to my father-in-law. Old boy in his late 70's, shot over 600 pigs in a single season in the big drought a few years back with his b/a .223 on his dead flat NSW Tablelands...
Liked On: 20-08-2023, 12:24 PM
Use WW760 in my 6.5x55ai and only had one failure to ignite in 860 rounds fired. CCI BR2s. I believe it was a faulty primer. Everyone said I MUST use a magnum primer. So I tried CCI Magnums. The...
Liked On: 20-08-2023, 12:23 PM
Greetings, Ball powders are harder to ignite and some older manuals recommended using Large Rifle Magnum primers for them. GPM.
Liked On: 20-08-2023, 12:23 PM
I'm running 308 SRP in Lapua and Peterson. Need to factor in the fact that the cost of SRP Lapua Palma is greater than LRP Lapua. And it seems that the Palma brass usually disappears off the shelves...
Liked On: 20-08-2023, 12:22 PM
Yes With all the usual caveats regarding reloading and variations in rifles. Noted difference are..... SRP Needs more powder to get same Vel Can be harder to ignite (you can get hang fires)...
Liked On: 20-08-2023, 12:22 PM
Quality traps all the way, spend the money and cry once...
Liked On: 20-08-2023, 12:17 PM
Do it once and do it right - the end result will be worth it
Liked On: 20-08-2023, 11:56 AM
Also get some plastacene from the warehouse to fill any places you really don't want the bedding to get into.
Liked On: 20-08-2023, 11:56 AM
blip do yourself a huge favour and buy a small lot of this clear furniture polish / wax I is all you will ever need 231538 I'm a commercial joiner by trade and have epoxy glued and moulded...
Liked On: 20-08-2023, 11:55 AM
The guys I knock about with are heli shooting insane numbers of reds in the CNI. They’ve ditched the ARs because the rifles get too hot and jam, so they use the Benelli semi-autos with 12ga buckshot....
Liked On: 20-08-2023, 10:47 AM
Have a look at the pics here in this thread from 2020 for some of the different styles of sharpener. https://www.nzhuntingandshooting.co.nz/f22/identify-knife-sharpener-57848/
Liked On: 20-08-2023, 10:37 AM