correct me if Im wrong but it will be a rebarrel not a reaming.....eg bolt head ,mag and action the same just the bit forward of chamber thats different.... so you could buy your t3x SS and get it...
Liked On: 31-05-2020, 02:35 PM
pretty much bog standard case head seperation I would say......someone tried to get two too many loads out of brass and forgot to use paper clip feeler guage to check for thin spot.... the very...
Liked On: 30-05-2020, 07:23 PM
Dundee we tried something different this year for pairing up decoys...we have done the long line thing in the past and found it rather too uniform...this season I bent up bits of #8 wire about...
Liked On: 29-05-2020, 03:06 PM
Dundee we tried something different this year for pairing up decoys...we have done the long line thing in the past and found it rather too uniform...this season I bent up bits of #8 wire about...
Liked On: 29-05-2020, 10:29 AM
Dundee we tried something different this year for pairing up decoys...we have done the long line thing in the past and found it rather too uniform...this season I bent up bits of #8 wire about...
Liked On: 29-05-2020, 10:16 AM
I got given a part box of bog standard hornady 140grn interlocts...was going to use them for wallabies,rifle shot stupid wee groups with them so they went deer stalking cause rifle was sighted in...
Liked On: 29-05-2020, 09:09 AM
the round shown is an old school silvertip....they came in 150grn for the .308. marlins like shorter rounds than winchesters...projectiles come with crimp groove/cannalure at different places for...
Liked On: 28-05-2020, 10:06 PM
I shoot 170grn projectiles out of mine into tight wee groups...but they are too plurry good for poking at paper,it did same with 160grn lapua megas and every 150grn projectile tried...and its a 80s...
Liked On: 28-05-2020, 09:12 PM
mix the shot together.and chuck some 7s and 8s in with it......and for tools you only need a mock chamber and a dowel of the internal diameter to tamp down the completed round...primer pokes out with...
Liked On: 28-05-2020, 02:11 PM
the round shown is an old school silvertip....they came in 150grn for the .308. marlins like shorter rounds than winchesters...projectiles come with crimp groove/cannalure at different places for...
Liked On: 27-05-2020, 09:12 PM
mix the shot together.and chuck some 7s and 8s in with it......and for tools you only need a mock chamber and a dowel of the internal diameter to tamp down the completed round...primer pokes out with...
Liked On: 27-05-2020, 08:46 PM
bird roofies....there is thread on it here somewhere....
Liked On: 26-05-2020, 09:10 PM
yip happened 2 years ago...if you know the area its not so strange afterall....went to high school in Taumarunui and many of us used to hunt possums each n every weekend. school kids in same area...
Liked On: 26-05-2020, 09:26 AM
the bisley versions appear to have been made by hand and foot rather than just by foot....never had an issue with mine.
Liked On: 25-05-2020, 09:43 PM
2-10mtrs irons all day long.....those ghost ring apertures on rugers look great,fibre optic option better still as perfect in low light.
Liked On: 25-05-2020, 09:09 PM