Went to drop a couple of carcass off at the chiller this morning. And these four were in the paddock lol haven’t seen sika on the hoof since nz. Be funny when the roar kicks off this will get the...
Liked On: 10-02-2023, 08:19 AM
I use 49.5gr 2206H behind 125 gr. Nosler Accubond for 2950fps. Loaded to mag length. Winchester brass Federal Match primers. No pressure signs . I think you'll find Winchester brass has a larger...
Liked On: 09-02-2023, 09:21 PM
I’ve used this before with good success. I didn’t know anything about tanning, couple YouTube videos later and the leader tanning kit end result was a pretty decent home job skin. I actually used...
Liked On: 09-02-2023, 09:13 PM
Mostly been covered, but an old thread with some other good info/suggestions of what's already about: https://www.nzhuntingandshooting.co.nz/f22/tent-%24200-%24500-recommendations-76270/index2.html#...
Liked On: 09-02-2023, 09:06 PM
Good start Matt Doesn't hurt to get off on the right foot and politely ask to tag along You're in the right region and on the right forum All the best
Liked On: 08-02-2023, 06:26 PM
Saw a good one a few weeks back!! a beautiful varmint Anschutz 1517 with the beaver tail stock! A suppressor manufacturer (not naming names) decided to 'skim' down the diameter of the barrel to...
Liked On: 08-02-2023, 06:14 PM
I personally rock a Cuben Tarp and a Cuben Tent both of which are mint (Zpacks pocket Tarp and Tarptent Stratosphere Li). The material is great doesnt stretch or sag in the cold and wet which is...
Liked On: 08-02-2023, 06:06 PM
Love the little DCF tents. For bad weather however I am increasingly a big fan of the wonder material - Corrugated Iron.
Liked On: 08-02-2023, 06:05 PM
The spring is the same dimensions as a Mauser spring so try advertising for that or contact Graham Chempion
Liked On: 08-02-2023, 11:44 AM
Out with my singer shot rifle again. The area is limestone & a tectonic fold; you really don't want to fall here! 🙊🙈🙉 https://youtu.be/5Hrl8TS5jcE
Liked On: 08-02-2023, 09:17 AM
RS Just finished doing this trigger procedure this morning on my M332. What a transformation from a heavy two stage crunch to a very smooth single stage squeeze. Thank you for sharing this with...
Liked On: 07-02-2023, 06:23 PM
I found RL25 best in my 6506ai (24in bbl) running 140gn AMAX. 2980 fps with Norma brass & 2950 fps with RP brass. Had initially tried 2213 & RL19, velocities were anemic. 2217 was better but RL25...
Liked On: 07-02-2023, 06:16 PM
2023 -what a year so far .and so it continues. Im here buggerising about on me computer last week when hello a PM arrives Bugger me its an invite to join mickey duck for a 3day stint in his wee...
Liked On: 07-02-2023, 06:12 PM
Well I reckon the Chinese need your technology on the next balloon. You have encrypted it so well that none of us mere mortals can see it. Sent from my SM-A226B using Tapatalk
Liked On: 07-02-2023, 06:12 PM
Despite their somewhat rather inflated price they are just expensive Chinese made junk. Also the eye relief looks a little tight at 89mm. I'd want 100mm at least. For the same price you can get a...
Liked On: 07-02-2023, 02:30 PM