Remove the front action torx bolt, then under that a 3mm allen key to undo the switch barrel locating grub screw, and change barrels. It's about a 3-minute job.
Liked On: 03-11-2022, 07:23 PM
A wander from last weekend an area lest travelled 188075188076188077188078
Liked On: 03-11-2022, 07:19 PM
Hey Duckhunter, in the past I converted a Sako Vixen from 222 to 6.5 Grendel. Bolt face is relatively straight forward enlargement, it's the mag box that'll be your problem as they are too narrow for...
Liked On: 03-11-2022, 02:10 PM
Thanks VC, good writeup that is easily understood.
Liked On: 03-11-2022, 01:52 PM
That is how it is measured yes, but the headspace is the amount of clearance between the cartridge and chamber dimensions.
Liked On: 03-11-2022, 01:50 PM
Project waypoint is something worth practising with, before you actually need it. If you're shooting long range, and have that range from a range finder, then you can point the watch at the...
Liked On: 03-11-2022, 01:37 PM
Pretty much a 7BM but with super accurate ammo off the shelf! As much as I dislike having to reload I think the good old 7saum will stay my go to. Drops big reds at 600 to 700 yards with ease. What...
Liked On: 03-11-2022, 06:17 AM
I think of it as keeping fit for life. For me the best thing(s) I have ever done for fitness are going to a muscular skeletal specialist to correct muscular imbalances. Getting a proper strength and...
Liked On: 03-11-2022, 05:56 AM
Not as bad as finding out you have a head case problem... :pacman:
Liked On: 02-11-2022, 09:34 PM
A lot of us did that for a job for 2 or more decades, and now we can only just walk...:o
Liked On: 02-11-2022, 08:59 PM
Caught number 80 for the year on this. 209361 This one has gone to the fridge. 209362
Liked On: 02-11-2022, 08:52 PM
Hi Members; im new to this; my son & I love to chase deer & Pigs ; practically dream about it most days . We use 300 blackout , 7mm08, 7mm Rem Mag. Very much enjoy following the threads posted &...
Liked On: 02-11-2022, 08:51 PM
I hate motivational bullshit, but that is true!
Liked On: 02-11-2022, 04:39 PM
Most full length Sizing die instructions tell you to wind the die down to the shell holder and then + another 1/4 or 1/2 turn. This will produce normally brass that should chamber in most rifles of...
Liked On: 02-11-2022, 03:21 PM
Case head separation,what to look for and how to avoid it comes up fairly often on here so when prepping some of my "beater brass" today I found one and thought I would section it to show what to...
Liked On: 02-11-2022, 03:20 PM