Moa Hunter
Banned

15704 Likes

Page 290 of 1047 First ... 190240276277278279280281282283284285286287288289290291292293294295296297298299300301302303304340390790 ... Last

• Jump to page:

1. 
   Moa Hunter liked post by 2post On thread : How do I fix this copper?

   What gear do you have? If you have access to a blow torch it’s easy to seal with silfoss.

   Liked On: 20-08-2022, 09:03 PM

2. 
   Moa Hunter liked post by veitnamcam On thread : How do I fix this copper?

   in order of goodness of repair tig weld copper rivet braze solder Keed it sticks cut to shape and stuffed in hole

   Liked On: 20-08-2022, 09:03 PM

3. 
   Moa Hunter liked post by Puffin On thread : ? Head Space

   For those with QuickLOAD, the dimensioned drawings supplied may be used to compare; say .257Roberts/.257AI, 243Win/.243AI, 30-06spr/30-06AI and so on. This comparison will find that officially...

   Liked On: 20-08-2022, 08:37 PM

4. 
   Moa Hunter liked post by Tankd On thread : ? Head Space

   Head space is not just one measurement of X to Y , for most applications . Usually it is on the whole of the shoulder , from where the body ends to where the neck starts for rimless rounds .Head...

   Liked On: 20-08-2022, 08:34 PM

5. 
   Moa Hunter liked post by Tikka7mm08 On thread : 6.5 PRC Load Development Begins

   Interesting 9 shots. 2.935" COL seems good. ...

   Liked On: 20-08-2022, 08:30 PM

6. 
   Moa Hunter liked post by kruza On thread : A question of ethics around EV use

   we pay tax at pump with fuel, so I'm guessing not. As to the recharging, I'd offer money if I needed to charge my car at friends house, just as I would If I needed to get gas. As you don't tend to go...

   Liked On: 20-08-2022, 08:21 PM

7. 
   Moa Hunter liked post by andyanimal31 On thread : Shit getting expensive

   Just looked at some 215m primers and the receipt from 2015. These were the days!https://uploads.tapatalk-cdn.com/20220820/c252d523050a1476f37e7deda5133f06.jpg Sent from my SM-A226B using Tapatalk

   Liked On: 20-08-2022, 07:50 PM

8. 
   Moa Hunter liked post by 6x47 On thread : Ring/groove at base of case shoulder

   Welll, bit hard to imagine this would simply be from a pickup during chambering. You'd expect the material to be partially round the periphery, not a solid ridge like the pics suggest. Not good QC...

   Liked On: 20-08-2022, 10:56 AM

9. 
   Moa Hunter liked post by Southcity On thread : Swarovski

   I have 5 x Z5’s with BT, 1 x Z6 BT and 2 x Z3’s ( 1 with BT). I have added the Zniki turret rings on most as I prefer numbers than colours. I also have Kahles, March, Lightforce, S&B and all nice...

   Liked On: 20-08-2022, 10:54 AM

10. 
    Moa Hunter liked post by Lauries Hut On thread : Swarovski

    I’ve got a 5 & 6. Don’t dial with either I have the BRH recticle on the Z6, all I can say is I’ve never had such an easy scope to zero. When you crank it 2 cm it’s 2 cm. Holds zero very well, I...

    Liked On: 20-08-2022, 10:54 AM

11. 
    Moa Hunter liked post by 7mm Rem Mag On thread : Swarovski

    I have Z5's on both my riffles (7mm rem mag and 223). I like them and they dial fine with good clear glass. I did have the turrets fall off one but Swarovski did fix it and sent a cap and 3...

    Liked On: 20-08-2022, 10:53 AM

12. 
    Moa Hunter liked post by Tedz50 On thread : ? Head Space

    If that were true it would not be possible to fireform standard brass in the tighter chamber.My theory would be use standard gauges to set up. Consult your gunsmith when refitting would be my...

    Liked On: 20-08-2022, 10:33 AM

13. 
    Moa Hunter liked post by veitnamcam On thread : ? Head Space

    As you should be able to fireform factory 7/08 in the AI I would say headspace should be the same. a google of the SAAMI specs should tell you.

    Liked On: 20-08-2022, 10:33 AM

14. 
    Moa Hunter liked post by caberslash On thread : Long range hunting stock - recommendations

    Ginga I'd recommend PSE Composites of Ireland. https://www.pseriflestocks.co.uk/ They take a different approach to most 'carbon' stockmakers, instead of using a carbon weave moulded over a...

    Liked On: 19-08-2022, 08:16 AM

15. 
    Moa Hunter liked post by Larskramer On thread : Long range hunting stock - recommendations

    I just git a hitec prs hunters stock... damn nice. Or a manners which I have in my 7mm saum, or find an older Ken Henderson also which I got on my 300 norma. They are all quite vertical grip, great...

    Liked On: 19-08-2022, 08:11 AM

Page 290 of 1047 First ... 190240276277278279280281282283284285286287288289290291292293294295296297298299300301302303304340390790 ... Last

• Jump to page: