Good on him.
Liked On: 29-07-2022, 08:41 PM
My father (rip) was the opposite - he shot humans for a bit. So when that stoush was over we moved to NZ and he took up hunting and I followed in his footsteps ( no, I didn’t shoot humans!) and...
Liked On: 29-07-2022, 08:35 PM
Iv had me to girls out since day one one we as a family have done Christmas in the bush when both kids where under 5. When the kids where new born we would tie the capsule on the back off the four...
Liked On: 29-07-2022, 08:34 PM
In saying that, I’ve also got a Lyman full length size die you could borrow also if you wanted to give it a go
Liked On: 29-07-2022, 07:36 PM
if its a bit on the fat side...what I ended up with... your case will do as you are describing.... the good ladies at gunworks will send you down another shell holder in a jiffy..$35 mine cost last...
Liked On: 29-07-2022, 07:35 PM
Get the sizing right, then trim to length, then chamfer the inside and outside of your case mouth.
Liked On: 29-07-2022, 07:34 PM
I lube the inside of all my necks - originally with graphite, simply dipped in a small pottle of it. And lately using the RCBS lube on a brush rolled over the lube pad. Sidetrack, when you lower...
Liked On: 29-07-2022, 07:32 PM
This. Measure a case before full length sizing it and then after. If it’s longer after you’re dragging the necks out. Easiest way to pin down what’s going on is just measure the cases and compare to...
Liked On: 29-07-2022, 07:32 PM
Are you lubing the inside of the necks generously? Had a similar problem and found I was pulling it back out on the up stroke. Had my die screwed right in and was scratching my head. So started...
Liked On: 29-07-2022, 07:31 PM
next step is to color a tight fitting case wit ha vivid pen and put in rifle and wiggle it back n forward with bolt to see where its contacting. my guess will be in web area. friggin oversized...
Liked On: 29-07-2022, 07:30 PM
These are the shell holders needed for the 270 - 202439202440
Liked On: 29-07-2022, 07:28 PM
I once had a similar problem, no matter how hard I cranked that die down it wouldn't chamber nicely. One issue was I was using a Hornady shell holder with RCBS dies or maybe and RCBS shell holder...
Liked On: 29-07-2022, 07:27 PM
Figured that out years back , after I bought a Japanese-M/cycle... Japan really knows how to copy and improve things
Liked On: 29-07-2022, 07:21 PM
Massive fan of howa have been for many years I believe that they are as good as anything tikka or sako can offer for a 900 price point instead of a $1700-3k one The hact trigger is awesome and can...
Liked On: 29-07-2022, 07:20 PM
202530 My mini action in 204 ruger is my favourite rifle, shoots better than my tikkas and brownings at half the price. Great quality at a price that allows you to buy more
Liked On: 29-07-2022, 07:19 PM