Last night 131335 131336
Liked On: 25-02-2020, 11:24 AM
131382 131383 131386
Liked On: 25-02-2020, 11:23 AM
I have a SAUM 180gr running at 3050 fps with up to 12 firings per Norma brass.....no issues yet. There appear to be heavy vertical scratching on all the necks, and my guess that is replicated...
Liked On: 25-02-2020, 06:40 AM
thar has invented a new sabot wildcat :thumbsup: Mooseman i find federal brass the worst ive tried as far as enlarged primer pockets go
Liked On: 25-02-2020, 06:38 AM
Do you really need to anneal the cases, have reloaded for 40 plus years and never annealed any of my brass. I do get split necks after a while but usually get quite a few loads from them before this...
Liked On: 25-02-2020, 06:38 AM
Not far enough annealing past shoulder, about 5mm needed otherwise you had a hard brass to soft brass junction at neck and shoulder junction which is most likely the highest stretching/stress region...
Liked On: 25-02-2020, 06:37 AM
I think I'd be finding another gunsmith for future work, the one (supposed gunsmith) who did the ceracoating might be better sitting under a shady tree if he can't reassemble it . . . . .
Liked On: 25-02-2020, 06:33 AM
Nice vids Norway! I enjoyed a NZ-hunting trip too. It was a great experience. The Scottish highland scenery is also beautiful. Keep m coming!
Liked On: 25-02-2020, 06:32 AM
FIRST STAGE CARVE THE PLUG Now having only the one stock for a Savage rifle and no easy way to get a replacement if I destroyed it in the process, I made the decision to make a new rifle stock...
Liked On: 24-02-2020, 04:46 PM
Unlike steel, brass does not harden with rapid cooling, it makes no difference if it is dropped in water or left to air cool. The only way to harden brass is by working it as in sizing it. A few...
Liked On: 24-02-2020, 04:36 PM
Hell that's one thing I've never seen I be interested in here what others think it is. Sorry I'm if no help. Sent from my CPH1903 using Tapatalk
Liked On: 24-02-2020, 04:33 PM
162 grn ELDM https://www.youtube.com/watch?v=TYoA45xJ_XY 131384 131385
Liked On: 24-02-2020, 09:43 AM
Here’s the 162 eldm from the off side side shoulder. It just made it into the shoulder but didn’t break it. 131406
Liked On: 24-02-2020, 09:40 AM
....and drive away leaving him blowing on his pie?
Liked On: 23-02-2020, 07:42 PM
I fairly regularly travel to the rifle range about 1.5 to 1.75 hrs drive away with several rifles, and always have to stop for a pee and or a pie. Rifles are in cases or bags and covered, along with...
Liked On: 23-02-2020, 07:42 PM