NAKED_GOOSE
Member

78 Likes

Page 3 of 6 First 123456 Last

• Jump to page:

1. 
   7mm Rem Mag liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   only had a chance to get 1 grouping while sighting it in as it was starting to rain, was still fairly decent (atleast compared to the 220 groupings) 1.3cm 5 shot group at 25m I'll go out again to...

   Liked On: 26-07-2024, 06:36 PM

2. 
   shananah liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   only had a chance to get 1 grouping while sighting it in as it was starting to rain, was still fairly decent (atleast compared to the 220 groupings) 1.3cm 5 shot group at 25m I'll go out again to...

   Liked On: 26-07-2024, 04:52 PM

3. 
   7mm Rem Mag liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   Just another 4x, cant remember the brand the blob is about 1" I find that the reticle is covering 90% of the blue blob so I can't really spit it up, I have tried using tape in a + shape but I...

   Liked On: 26-07-2024, 11:38 AM

4. 
   shananah liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   Slight delay but got out again with the 4x off my enfield, results seem much better, after a few zeroing shots I managed to get 4 shots in 1.5cm at 35m then 3 shots just over an inch at 60m, which...

   Liked On: 26-07-2024, 10:21 AM

5. 
   shananah liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   And a picture of the rifle for some reference, Its a Izhmash Bars 4-1, little rough around the edges, has had the barrel shortened to 16" and threaded but soon to have a suppressor on there. 248403

   Liked On: 26-07-2024, 09:47 AM

6. 
   Frogfeatures liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   these are all 5 shot groups, same target, different paper. this is from before I touched the scope, they all shot high and right @ 50m so I made 2 clicks of adjustment to the left and proceeded to...

   Liked On: 20-07-2024, 11:12 AM

7. 
   Micky Duck liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   And a picture of the rifle for some reference, Its a Izhmash Bars 4-1, little rough around the edges, has had the barrel shortened to 16" and threaded but soon to have a suppressor on there. 248403

   Liked On: 20-04-2024, 02:31 PM

8. 
   Micky Duck liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   Right, After a fair bit of faffing I've finally got some loaded rounds together, 20gr of 2206H topped with a 50gr super explodey, loaded to 51mm OAL, will take them out and see what happens once...

   Liked On: 20-04-2024, 02:13 PM

9. 
   Micky Duck liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

   I have ordered the spsx, mainly due to them being cheaper by about $10 per packet than the other 50gr projectiles on offer, I'll certainly be referring to them as super explodies :XD: I have about...

   Liked On: 20-04-2024, 02:12 PM

10. 
    Micky Duck liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

    admittedly I was a little surprised the twist was 1 in 16, had expected 1 in 14 or so but I suppose 1 in 16 is about the same as the 222 rifles of the era, there seems to be plenty 30-50gr...

    Liked On: 11-03-2024, 05:26 PM

11. 
    Micky Duck liked post by NAKED_GOOSE On thread : Who still makes 0.223" diameter projectiles?

    I’ve got a few rounds that the previous owner loaded, I’ll be pulling them apart but they were apparently loaded with 20-21 gr of 2207, which looking at adi data for 222 is about right, I’m thinking...

    Liked On: 11-03-2024, 11:41 AM

12. 
    Hugh Shields liked post by NAKED_GOOSE On thread : How to make my .22 quieter

    I have a cheap $50 can from hunting and fishing on my lithgow 22, using CCI subsonic HP's and its pretty quiet will happily use without ear pro, finishing shots can be fairly loud compared to general...

    Liked On: 30-11-2023, 12:54 AM

13. 
    rewa liked post by NAKED_GOOSE On thread : How to make my .22 quieter

    I have a cheap $50 can from hunting and fishing on my lithgow 22, using CCI subsonic HP's and its pretty quiet will happily use without ear pro, finishing shots can be fairly loud compared to general...

    Liked On: 29-11-2023, 06:06 PM

14. 
    timattalon liked post by NAKED_GOOSE On thread : How to make my .22 quieter

    I have a cheap $50 can from hunting and fishing on my lithgow 22, using CCI subsonic HP's and its pretty quiet will happily use without ear pro, finishing shots can be fairly loud compared to general...

    Liked On: 22-11-2023, 01:42 PM

15. 
    Frogfeatures liked post by NAKED_GOOSE On thread : Winchester 1892 hammer won’t cock back with lever after disassembly

    Looks like the issue is sorted thanks to Fssprecision, The issue pretty much came down to general wear on the rifle, have had the hammer built up with weld so that it interfaces with the bolt and...

    Liked On: 12-11-2023, 02:57 PM

Page 3 of 6 First 123456 Last

• Jump to page: