NAKED_GOOSE
Member

345 Likes

Page 4 of 23 First 123456789101112131415161718 ... Last

• Jump to page:

1. 
   NAKED_GOOSE liked post by Crusty On thread : Who still makes 0.223" diameter projectiles?

   Jeez Goose! you have really sent me down a rabbit hole! Checked the case necks - fired up my lathe and turned up and threaded a mandrel for my neck Turner (didn't have a .22) Shortened 50...

   Liked On: 21-07-2024, 09:36 AM

2. 
   NAKED_GOOSE liked post by Crusty On thread : Who still makes 0.223" diameter projectiles?

   yes, some data. AR2207 22.5 gr. 3392 - but seated too long, so ignore 23.0 gr. 3384 23.5 gr. 3494 25.0 gr. 3693 - this one showed some cratering of the primer, so too hot.

   Liked On: 20-07-2024, 11:00 AM

3. 
   NAKED_GOOSE liked post by Crusty On thread : Who still makes 0.223" diameter projectiles?

   I'd suggest trying 24.5gr, but watch out for pressure signs. You can always post a photo of some fired case heads/primers if you want an opinion. My last load I did was 24.7gr, but a .221" bullet,...

   Liked On: 19-07-2024, 06:59 PM

4. 
   NAKED_GOOSE liked post by pennyless On thread : Who still makes 0.223" diameter projectiles?

   Not sure which mounts you have. But they are important. I have the 7.62x39 version and it shoots steel Barnel ammo entirely adequately. As Crusty says , they are a working rifle and mine has been...

   Liked On: 19-07-2024, 06:59 PM

5. 
   NAKED_GOOSE liked post by Micky Duck On thread : Who still makes 0.223" diameter projectiles?

   Your still not getting it. You should shoot much much better prone with padding than standing no matter how you try it. You are in a much more stable position,that's one of the rules that's simply...

   Liked On: 19-07-2024, 06:58 PM

6. 
   NAKED_GOOSE liked post by Micky Duck On thread : Who still makes 0.223" diameter projectiles?

   Level or not won't matter much at that range.at 25 yards you could shoot pattern like that with a smoothbore shotgun.

   Liked On: 19-07-2024, 05:36 PM

7. 
   NAKED_GOOSE liked post by Crusty On thread : Who still makes 0.223" diameter projectiles?

   255226255227

   Liked On: 19-07-2024, 04:24 PM

8. 
   NAKED_GOOSE liked post by Micky Duck On thread : Who still makes 0.223" diameter projectiles?

   Are you saying you have hard bits of rifle sitting on hard bit of post when shooting???

   Liked On: 19-07-2024, 09:25 AM

9. 
   NAKED_GOOSE liked post by Oldbloke On thread : Who still makes 0.223" diameter projectiles?

   You will never shoot really tight groups without a bench rest type set up or similar. Untill you have a set up like that your just wasting components.

   Liked On: 19-07-2024, 09:25 AM

10. 
    NAKED_GOOSE liked post by gonetropo On thread : Cost per meal

    2 per meal? bloody hell thats a bit light

    Liked On: 19-07-2024, 09:10 AM

11. 
    NAKED_GOOSE liked post by Micky Duck On thread : Who still makes 0.223" diameter projectiles?

    to put your rest into perspective..line up on target,close your eyes for 10 seconds and open them again.....if your not still on the bull your testing yourself more than the rifle.. ITS THAT SIMPLE.

    Liked On: 18-07-2024, 12:01 PM

12. 
    NAKED_GOOSE liked post by Crusty On thread : Who still makes 0.223" diameter projectiles?

    I'm hoping to take mine to the range on Sunday, will let you know how I go and what loads work. I'm going to load up some Hornady 40gr and some Sierra 40gr using 2207 and 2219. Remember that the...

    Liked On: 17-07-2024, 08:57 AM

13. 
    NAKED_GOOSE liked post by bluecod1967 On thread : Who still makes 0.223" diameter projectiles?

    just a thought get a 224 lee tumble lube die lube ya 224 projectiles and swage them down my 224 die comes out at 223.5 maybe worth a crack if ya cant get 223 projectiles easily

    Liked On: 17-07-2024, 08:57 AM

14. 
    NAKED_GOOSE liked post by Micky Duck On thread : Who still makes 0.223" diameter projectiles?

    Shooting over a fencepost means you are kneecapping yourself. At very least get into a damped prone. Or any decent prone position. Ok so lightweight n short only.

    Liked On: 17-07-2024, 08:57 AM

15. 
    NAKED_GOOSE liked post by Oldbloke On thread : Who still makes 0.223" diameter projectiles?

    Yep, or perhaps to shooting sticks. Picnic table?

    Liked On: 17-07-2024, 08:57 AM

Page 4 of 23 First 123456789101112131415161718 ... Last

• Jump to page: