nigelp
Member

7 Likes

1. 
   nigelp liked post by Shearer On thread : Gun Porn, show off your new toys

   New to me left handed Roessler Titan 3 Lux in 223rem with a 3-9x40 Zeiss Conquest on top. Rifle and scope bought from forum members (thanks guys). 261805 261806 I am in the process of loading up...

   Liked On: 26-10-2024, 01:16 PM

2. 
   nigelp liked post by Tentman On thread : 6mm ARC

   I had one. Criterion 22" barrel in a Savage SA. Normal load was a 103 ELDX at 2740 but with Leverevolution I had a "hunting" load or the same projectile at 2860. It shot very well but after a bit...

   Liked On: 24-10-2024, 10:15 PM

3. 
   nigelp liked post by grandpamac On thread : Split brass

   Greetings again all, I could have been clearer in my earlier post. The early head separations in belted cases can be as much a rifle problem as a case problem. The belt recess in some belted...

   Liked On: 12-07-2022, 11:55 AM

4. 
   nigelp liked post by Kelton On thread : Split brass

   Should be able to run the paper clip up and down the inside of the case with no snagging is my take on it

   Liked On: 11-07-2022, 10:36 PM

5. 
   nigelp liked post by Micky Duck On thread : Split brass

   sharp pointy paper clip with a right angled bend in end about 3mm long...scratch the inside of case as hard as you can....if there is a fault it will "catch" try it on the ones that are buggered and...

   Liked On: 11-07-2022, 10:35 PM

6. 
   nigelp liked post by johnd On thread : Hornady comparator and headspace tool holders

   I borrowed a hefty block of hardwood and with a Forstner bit made holes to hold the inserts. 201290

   Liked On: 11-07-2022, 12:01 PM

7. 
   nigelp liked post by Sh00ter On thread : VTP Modular Chassis System

   A while back I picked up a Victory Through Precision Modular Chassis System for my Ruger American Ranch rifle. I really like this rifle and wanted to upgrade it. I was looking to swap out the...

   Liked On: 02-06-2022, 07:07 PM