No.3
Member

2527 Likes

Page 37 of 169 First ... 232425262728293031323334353637383940414243444546474849505187137 ... Last

• Jump to page:

1. 
   Roarless20 liked post by No.3 On thread : Gunsmith for Barrel straightening

   I am actually not too sure. If you search for the clip you should find the older gent who was demonstrating the technique using a big block of timber and said barrel held by the muzzle and thwacked...

   Liked On: 14-09-2024, 10:49 PM

2. 
   JesseYoung liked post by No.3 On thread : Damaged Crown

   Round head screw is def the go, failing that a piece of plastic rod and round the end off with sandpaper in the drill prior to applying paste. An earplug down the muzzle flush with the crown, and...

   Liked On: 14-09-2024, 08:14 PM

3. 
   RUMPY liked post by No.3 On thread : Damaged Crown

   Round head screw is def the go, failing that a piece of plastic rod and round the end off with sandpaper in the drill prior to applying paste. An earplug down the muzzle flush with the crown, and...

   Liked On: 14-09-2024, 06:28 PM

4. 
   Micky Duck liked post by No.3 On thread : Firearm License unrelated referee

   With half of SA's population already living in NZ there must be at least one recent import that has known him for longer than 3 years? Ha! Yeah this is a bit of a hard one, this was something...

   Liked On: 14-09-2024, 01:52 PM

5. 
   Hugh Shields liked post by No.3 On thread : Another petition...

   Those pieces of paper are interesting, the Crown still has rights to void your claim and the piece of paper basically exists at his majesties' pleasure anyway... I'd love to lock stock and barrel...

   Liked On: 14-09-2024, 01:25 PM

6. 
   Bol Tackshin liked post by No.3 On thread : Firearm License unrelated referee

   With half of SA's population already living in NZ there must be at least one recent import that has known him for longer than 3 years? Ha! Yeah this is a bit of a hard one, this was something...

   Liked On: 14-09-2024, 10:13 AM

7. 
   Micky Duck liked post by No.3 On thread : Wallows

   The kaimais is a really easy place to spook deer and stumble into them without even knowing they are there. I've often spooked a big group of them at less than a couple of meters away and never seen...

   Liked On: 14-09-2024, 12:07 AM

8. 
   Micky Duck liked post by No.3 On thread : Hilux inverted leaf springs

   Do a bit of math on it, work out what your standard weight on the rear spring pack is and then divide by about 75 (Kg, which is about what each leaf will carry). I went from the standard 3-leaf plus...

   Liked On: 14-09-2024, 12:02 AM

9. 
   Micky Duck liked post by No.3 On thread : Auckland Gunsmith / BLR

   Jeez, that sounds a little extreme. I'm getting images of the terminator stuck to a magnet upside down!

   Liked On: 13-09-2024, 11:20 AM

10. 
    Micky Duck liked post by No.3 On thread : Tuatahi Bearded Axe - the Tuatahi Trapper

    $385 for the short handle, $395 for the longer one. To be fair, for a quality forged and sharpened axe that is not as bad as I was expecting - equivalent quality and finish imported is going to cost...

    Liked On: 13-09-2024, 11:15 AM

11. 
    XR500 liked post by No.3 On thread : ZERO CHECK CLIP ON

    And I didn't think 3 shot groups were any good ha ha ha :ORLY:

    Liked On: 13-09-2024, 11:08 AM

12. 
    kristopher liked post by No.3 On thread : Tuatahi Bearded Axe - the Tuatahi Trapper

    $385 for the short handle, $395 for the longer one. To be fair, for a quality forged and sharpened axe that is not as bad as I was expecting - equivalent quality and finish imported is going to cost...

    Liked On: 13-09-2024, 09:33 AM

13. 
    Roarless20 liked post by No.3 On thread : Thermal Optics under scrutiny?

    Bang on, no pun intended. It does not matter what law abiding and ethical hunters use as tools to hunt with, they will still follow the rules of the day and take the safety precautions. Should we...

    Liked On: 13-09-2024, 09:17 AM

14. 
    Trout liked post by No.3 On thread : ZERO CHECK CLIP ON

    And I didn't think 3 shot groups were any good ha ha ha :ORLY:

    Liked On: 13-09-2024, 08:38 AM

15. 
    BSA270 liked post by No.3 On thread : Powder recommendations for short barrel 308?

    I'd be looking at other options than 2208 - 2206H maybe? Although it does depend nowadays on what you can get you hands on...

    Liked On: 12-09-2024, 10:48 PM

Page 37 of 169 First ... 232425262728293031323334353637383940414243444546474849505187137 ... Last

• Jump to page: