No.3
Member

2527 Likes

Page 60 of 169 First ... 104647484950515253545556575859606162636465666768697071727374110160 ... Last

• Jump to page:

1. 
   BSA270 liked post by No.3 On thread : Maxtoch Headlamp

   The basic checks on them which you could do yourself to help the process along, contacts clean and connected, wiring not damaged or pulled and plugs in place, LED board and internals in the headlamp...

   Liked On: 31-05-2024, 06:45 PM

2. 
   Got-ya liked post by No.3 On thread : Imported trailers, yay or nay ?

   And just make sure that they have NZ standard wheel bearings and seals so you can replace them quickly at WoF fail time. Otherwise they are a pain in the arse and you end up having to hold a couple...

   Liked On: 31-05-2024, 04:13 PM

3. 
   No good names left liked post by No.3 On thread : Imported trailers, yay or nay ?

   I think you're both missing the point I was making - what my experience with in repairing trailers damaged like this is that the load was on the evenly loaded and heavy side but within limits for the...

   Liked On: 31-05-2024, 03:37 PM

4. 
   uk_exile liked post by No.3 On thread : Kmart/Campmaster "Jetboil"

   Mmmm, Korma... Might be a budget Chinese cooker, but it appears equally as functional as the Jetboil version I have experience of. Can't see any reason to hate on it to be fair. Didn't need it,...

   Liked On: 31-05-2024, 09:14 AM

5. 
   flock liked post by No.3 On thread : how little reworking of the brass while reloading is necessary

   Change die types - if you use a full length bushing die you can set the neck tension you want to the case's neck thickness and then set the die height to control the shoulder length (headspacing)...

   Liked On: 30-05-2024, 05:49 PM

6. 
   Micky Duck liked post by No.3 On thread : Kmart/Campmaster "Jetboil"

   I just got one sent out, just ordered one online and put my address in etc...

   Liked On: 30-05-2024, 03:36 PM

7. 
   Roarless20 liked post by No.3 On thread : 223 over resized brass?

   Was it a Redding shellholder to match the die? I have seen this once before but in the opposite direction - a FL die from one manufacturer combined with a shellholder from a different manufacturer...

   Liked On: 30-05-2024, 12:38 PM

8. 
   Pengy liked post by No.3 On thread : Bahco Knives

   Worthwhile though if the change in steel that has been mentioned is the difference between the Euro and Chinese versions. The Euro one is actually a bloody good knife - at any price but at less than...

   Liked On: 29-05-2024, 10:17 PM

9. 
   40mm liked post by No.3 On thread : 69 F-100

   If you have a cheap 20t press you can easily make a form tool and produce your own patches for the tray - chances are the donor will have the same rot problems as they are all the same age. Virgin...

   Liked On: 29-05-2024, 12:28 PM

10. 
    Finnwolf liked post by No.3 On thread : 69 F-100

    If you have a cheap 20t press you can easily make a form tool and produce your own patches for the tray - chances are the donor will have the same rot problems as they are all the same age. Virgin...

    Liked On: 29-05-2024, 11:40 AM

11. 
    No good names left liked post by No.3 On thread : Multi choice test when renewing license

    Fixed it for you...

    Liked On: 27-05-2024, 07:35 PM

12. 
    chainsaw liked post by No.3 On thread : Torque specs for tikka rings?? Scope sliding backwards

    I keep saying this, if you need to lap you need to buy better rings, period. If you have decent rings, you won't have any slipping of marking issues...

    Liked On: 27-05-2024, 09:46 AM

13. 
    338MAN mk2 liked post by No.3 On thread : Torque specs for tikka rings?? Scope sliding backwards

    I keep saying this, if you need to lap you need to buy better rings, period. If you have decent rings, you won't have any slipping of marking issues...

    Liked On: 27-05-2024, 09:25 AM

14. 
    tetawa liked post by No.3 On thread : PSA: Unnecessary Bureaucracy with Import Permits

    It isn't really - you can't control anything when you can't get your own crap sorted first.

    Liked On: 27-05-2024, 09:16 AM

15. 
    BRADS liked post by No.3 On thread : Torque specs for tikka rings?? Scope sliding backwards

    I keep saying this, if you need to lap you need to buy better rings, period. If you have decent rings, you won't have any slipping of marking issues...

    Liked On: 26-05-2024, 11:30 PM

Page 60 of 169 First ... 104647484950515253545556575859606162636465666768697071727374110160 ... Last

• Jump to page: