No.3
Member

2511 Likes

Page 1 of 168 12345678910111213141551101 ... Last

• Jump to page:

1. 
   Trout liked post by No.3 On thread : Moose

   Whatever happened to the bounty that was put up for evidence of the moose in around 2010? Did that expire or does it still exist as a prize??? Be a laugh to have a crack at it, thermal survey off a...

   Liked On: Yesterday, 09:26 PM

2. 
   blip liked post by No.3 On thread : Ford ranger 2 litre bi turbo

   Back when we was kids, a blown engine was a rare and exotic thing... Now not so much.

   Liked On: Yesterday, 07:48 PM

3. 
   Trout liked post by No.3 On thread : Ford ranger 2 litre bi turbo

   Back when we was kids, a blown engine was a rare and exotic thing... Now not so much.

   Liked On: Yesterday, 06:36 PM

4. 
   bumblefoot liked post by No.3 On thread : Gas and electric benchtop stoves

   A piece of fiber cement sheet, problem solved for this. A little bit of an air gap underneath and no drama.

   Liked On: Yesterday, 09:59 AM

5. 
   Frogfeatures liked post by No.3 On thread : A Bit of a Sort Out

   Hmmm - fitted the new-ish hose to the 10Kg machine and gave it a test run outside. Kept popping the hose off the drain pump fitting, no mechanical retainer on the plastic pump housing so the hose...

   Liked On: 24-03-2025, 07:58 PM

6. 
   40mm liked post by No.3 On thread : Quick change tool post, advice please

   https://www.aliexpress.com/item/1005008158798533.html?spm=a2g0o.productlist.main.13.748930a6isU9nm&algo_pvid=7a426f7b-a4b9-4711-adce-dac99b718d46&algo_exp_id=7a426f7b-a4b9-4711-adce-dac99b718d46-6&pdp...

   Liked On: 24-03-2025, 03:30 PM

7. 
   hunt08 liked post by No.3 On thread : Fuked quad

   Be worthwhile doing a frame swap if you can find one. I got a trx300 with a rooted frame from cow cocky duties, patched it back up and goes mint. Looks like turds, which is an anti-theft device but...

   Liked On: 23-03-2025, 06:41 PM

8. 
   Micky Duck liked post by No.3 On thread : Low recoil 7mm SAUM load?

   Why not load the .308 with 140gr or even 130gr? Do the same job I would have thought, and probably easier than downloading the SAUM? I dunno, I just don't see the point of having a short mag then...

   Liked On: 23-03-2025, 05:11 PM

9. 
   Dan88 liked post by No.3 On thread : A Bit of a Sort Out

   My desire to hoard less received a knock today. I had an old LG washing machine here that suffered a failed spin brake motor (cracked housing). It's still a good machine apart from that, but not...

   Liked On: 23-03-2025, 03:05 PM

10. 
    Trout liked post by No.3 On thread : 308 Brass what is a good brand?

    I'm using 175gr Hornady Sub-X pills, Win cases, currently CCI primers (but to be fair it will be whatever is about going forwards), and 9.5gr of Trailboss powder. Seated to the cannelure on the...

    Liked On: 22-03-2025, 10:00 PM

11. 
    dannyb liked post by No.3 On thread : 308 Brass what is a good brand?

    Lapua is the pick at the moment, although the new packaging seems to have more flat case mouths. If buying it, I'd consider a couple of 50-boxes of loaded Sako Gamehead - that will give you 100...

    Liked On: 22-03-2025, 09:59 AM

12. 
    Micky Duck liked post by No.3 On thread : MQ Triton diff swap

    Is the housing different or just the diff head? If it was me and the only difference was the diff head and the housing is the same, I'd just pop the axles out enough to clear the splines, release...

    Liked On: 21-03-2025, 10:13 AM

13. 
    Micky Duck liked post by No.3 On thread : MQ Triton diff swap

    Do you have the in cab switch? Is the truck a CANBus system - as you will need to get the control modules altered to allow it to recognise the locking diff system and then control it if it is. The...

    Liked On: 21-03-2025, 10:12 AM

14. 
    m101a1 liked post by No.3 On thread : MQ Triton diff swap

    Nah, where's the kiwi No8 wire spirit there? It isn't actually that bad, but you do need decent supports as you are swinging on some fairly substantial hardware while the thing is up by the arse and...

    Liked On: 20-03-2025, 09:06 PM

15. 
    Delphus liked post by No.3 On thread : MQ Triton diff swap

    Do you have the in cab switch? Is the truck a CANBus system - as you will need to get the control modules altered to allow it to recognise the locking diff system and then control it if it is. The...

    Liked On: 20-03-2025, 09:29 AM

Page 1 of 168 12345678910111213141551101 ... Last

• Jump to page: