Chase accuracy not speed, that's what the swede is famed for, anything over 2600 fps will be perfectly adequate for hunting out to 3-400 ydswith that bullet. I use 2206h in my m38 sporterised with...
Liked On: 15-03-2025, 12:46 PM
For the best results, we recommend having the bush machined on a lathe. We've encountered numerous drilled bushes that were not perfectly concentric, including one recently that was approximately 1mm...
Liked On: 25-12-2024, 09:50 PM
given what deer numbers are like at the moment, shoot whatever. given the price of meat at the supermarket: shoot whatever
Liked On: 21-12-2024, 10:08 AM
and thats what kids should be doing with their dads. you sir are a damn good bugga
Liked On: 16-12-2024, 08:31 PM
Two spikers from last night. 80 yds. Two shots bang flop. 120gn Barnes triple shocks 263887
Liked On: 27-11-2024, 06:28 PM
Does it chamber??? Stop measuring and problem goes away.
Liked On: 19-11-2024, 06:23 PM
Currently duplicating one by digital eye ometer 262866 262867
Liked On: 11-11-2024, 09:50 AM
I will add there are exceptions, The below was a US$80 blank off ebay, shaped on a duplicator then finished the owners friend who is gunsmith with excellent stock making abilities. 262873...
Liked On: 11-11-2024, 09:50 AM
short answer is ..tighter than they are now...suggest a drop of locktite on the end thats being forced INTO rings.... fair bugs me that rifles leave shops NOT set up right.
Liked On: 31-10-2024, 09:36 PM
luckey A bit of a drive from my place( a hour) but I'm happy to pick you up and drop you off, store you're trailer and vehicle at my place if you want that piece of mind. Just pre arrange a pick...
Liked On: 15-10-2024, 07:02 PM
Here's one i enjoy getting out and shooting some critters with now and again, my 1941 no4 sniper rifle. its not the oldest I have but its by far the heaviest, 11.6 lbs!! Ya feel that after a 1000m...
Liked On: 25-09-2024, 09:35 PM
Covered some ground lately with a very tidy Sako 75 Finnlight The 140 nbt @2900fps lays Sika down no problem 258417
Liked On: 08-09-2024, 07:34 PM
I use a Gerber folder. Don't know the model but thin handle and about 3and bit inch blade. About 55 bucks and hold a good edge with enough meat for taking off skin. Been using it for 6 or 8 years.
Liked On: 07-09-2024, 05:37 PM
1995 Terrano with 4" thick full sized single foam mattress in the back.rear seats folded up or for even more room remove the base piece so mattress flat right to back of front seats.the sunroof let's...
Liked On: 17-07-2024, 06:18 PM
. All that will be left is GC and H&F and we can all enjoy the associated price hikes! There surely wont be any more small retailers signing up for this punishment! I love the small retailers, the...
Liked On: 08-07-2024, 05:57 PM