Oli1102
Member

88 Likes

Page 3 of 6 First 123456 Last

• Jump to page:

1. 
   dannyb liked post by Oli1102 On thread : Auto powder dispensers

   I recently acquired a Chargemaster Lite. I do like it compared to my Uniflow as I can seat a bullet concurrently, which dramatically reduces my loading time. I have one charge dispensing, whilst...

   Liked On: 25-01-2021, 09:33 PM

2. 
   G.I_Joel liked post by Oli1102 On thread : Best adi powder data

   I use Hornady 10th Edition and cross reference with the ADI online data. I want both as a paper copy so I had been waiting for the ADI 10th edition to release so that it had the newer APS powders and...

   Liked On: 23-01-2021, 04:04 PM

3. 
   wsm junkie liked post by Oli1102 On thread : Annealling

   I built one similar, however using a second motor and case feeder. I have a chart on the top left that I use to record previous settings for cartridge/headstamps. I use tempilaq to work out the...

   Liked On: 07-06-2020, 11:47 AM

4. 
   Shadowsol liked post by Oli1102 On thread : Annealling

   I built one similar, however using a second motor and case feeder. I have a chart on the top left that I use to record previous settings for cartridge/headstamps. I use tempilaq to work out the...

   Liked On: 02-06-2020, 12:08 PM

5. 
   Moa Hunter liked post by Oli1102 On thread : ORDER OF ACTIONS IN RE LOADING to be considered.

   This is my current process for rifle reloading. I do go a bit overboard but I only reload 50 or 100 at a batch so time spent isn’t much of an issue. I just added expand necks as I’m going to go down...

   Liked On: 01-06-2020, 05:18 PM

6. 
   ANTSMAN liked post by Oli1102 On thread : Annealling

   I built one similar, however using a second motor and case feeder. I have a chart on the top left that I use to record previous settings for cartridge/headstamps. I use tempilaq to work out the...

   Liked On: 01-06-2020, 05:03 PM

7. 
   Kiwi Sapper liked post by Oli1102 On thread : ORDER OF ACTIONS IN RE LOADING to be considered.

   This is my current process for rifle reloading. I do go a bit overboard but I only reload 50 or 100 at a batch so time spent isn’t much of an issue. I just added expand necks as I’m going to go down...

   Liked On: 01-06-2020, 02:45 PM

8. 
   dirkvanvuuren liked post by Oli1102 On thread : Annealling

   I built one similar, however using a second motor and case feeder. I have a chart on the top left that I use to record previous settings for cartridge/headstamps. I use tempilaq to work out the...

   Liked On: 31-05-2020, 08:46 PM

9. 
   25 /08 IMP liked post by Oli1102 On thread : Annealling

   I built one similar, however using a second motor and case feeder. I have a chart on the top left that I use to record previous settings for cartridge/headstamps. I use tempilaq to work out the...

   Liked On: 31-05-2020, 08:30 PM

10. 
    Moa Hunter liked post by Oli1102 On thread : What's everyone using to de cap brass without sizing for annealing ?

    To the first question, I use an RCBS universal decapping die which works awesome. I have a little bag of spare pins as well for when one breaks. Bear in mind if you are using brass with a reduced...

    Liked On: 27-12-2019, 07:40 AM

11. 
    Cordite liked post by Oli1102 On thread : Blow torch for annealing

    Yeah I use one from bunnings, but I brought a hose to connect it to my 9Kg LPG bottle for a more consistent pressure and economically it makes annealing way cheaper! 125512

    Liked On: 08-12-2019, 03:23 PM

12. 
    rewa liked post by Oli1102 On thread : Blow torch for annealing

    Yeah I use one from bunnings, but I brought a hose to connect it to my 9Kg LPG bottle for a more consistent pressure and economically it makes annealing way cheaper! 125512

    Liked On: 08-12-2019, 02:47 PM

13. 
    janleroux liked post by Oli1102 On thread : Blow torch for annealing

    Yeah I have found it doesn’t give a nice pencil flame with the one I have, so had reservations about it when I started. I have found it to work fine and heat evenly though and the width of the flame...

    Liked On: 08-12-2019, 10:13 AM

14. 
    dogmatix liked post by Oli1102 On thread : Blow torch for annealing

    Yeah I use one from bunnings, but I brought a hose to connect it to my 9Kg LPG bottle for a more consistent pressure and economically it makes annealing way cheaper! 125512

    Liked On: 08-12-2019, 09:17 AM

15. 
    takbok liked post by Oli1102 On thread : Howa 1500 bolt knob options

    I haven’t got my bolt knob yet (ordering a Badger Ord. one from Brownells) but I threaded my handle in 5/16-24 the DIY way, using files and a die set. Came out really good, as I couldn’t find a...

    Liked On: 29-11-2019, 10:24 AM

Page 3 of 6 First 123456 Last

• Jump to page: