omark
Member

219 Likes

Page 8 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   Calvnz1 liked post by omark On thread : 303 powder?

   2208 and 2208

   Liked On: 06-05-2023, 01:21 PM

2. 
   tibo liked post by omark On thread : Area to practice shoot? (Bay of Plenty)

   What’s the protocol you refer to? If you have a range Ticket you can use the range whenever you like

   Liked On: 04-05-2023, 03:14 PM

3. 
   Frogfeatures liked post by omark On thread : Info needed .455 Webley

   If you do a search there are a couple of posts on loading and powders for the “wobbly ” here already and some data. I’ve had best results with bullseye and one end and blue dot at the other end of...

   Liked On: 03-05-2023, 11:09 PM

4. 
   Bagheera liked post by omark On thread : 303 powder?

   2208 and 2208

   Liked On: 03-05-2023, 05:04 PM

5. 
   apkiwi liked post by omark On thread : MUES Aperture sight for SMLE?

   They were only ever shot with a blade. Tunnel type for sights were not used until late 60s. There were some Motty and central examples with removable blades but almost all rifles used standard blades

   Liked On: 03-04-2023, 07:58 PM

6. 
   Moa Hunter liked post by omark On thread : Fun with 22s - wee ammo test

   I tested 9 different brands of .22 match/standard ammo a couple of weekends ago in my Lithgow and fired two Cards for each to prove consistency The rws target rifle came out no1 . The Eley club...

   Liked On: 20-03-2023, 12:48 PM

7. 
   Moa Hunter liked post by omark On thread : Worms

   Would be good dog tikka if frozen down for a couple of weeks Shame to Put it in the ground

   Liked On: 13-03-2023, 10:39 PM

8. 
   kristopher liked post by omark On thread : .303 British Load Data Variations

   I know you get lots of variations depending on what your shooting but 39gns in good barrels or 40gns of 2208 in bad barrels. I’ve always had very good accuracy with this load and a large range of...

   Liked On: 13-03-2023, 02:21 PM

9. 
   shananah liked post by omark On thread : Nothing wrong with old primers

   I’ve tried lots of methods including the rcbs tool (painfully tedious) so I use a hydraulic decapper and hammer. Most have a sealant around the primer which makes them hard to move but a candle will...

   Liked On: 04-02-2023, 02:23 PM

10. 
    Moa Hunter liked post by omark On thread : Nothing wrong with old primers

    I’ve tried lots of methods including the rcbs tool (painfully tedious) so I use a hydraulic decapper and hammer. Most have a sealant around the primer which makes them hard to move but a candle will...

    Liked On: 03-02-2023, 09:29 PM

11. 
    shananah liked post by omark On thread : Nothing wrong with old primers

    I agree. I’m on the white box ones myself and am then changing over to ADI berdan primers using L2a2 berdan brass. I think it’s 70s vintage. On the .303 front I’ve started to use the shortage as an...

    Liked On: 03-02-2023, 06:17 PM

12. 
    SPEARONZ liked post by omark On thread : Import advice

    Brownells are no problem

    Liked On: 27-01-2023, 05:43 PM

13. 
    the.camo.butcher liked post by omark On thread : Components newbie

    Gun city seem to still have primers if you have one near you. Depending on your calibre there are still a few projectiles that come in from time to time. Leave your requirements with your local...

    Liked On: 14-01-2023, 09:22 PM

14. 
    57jl liked post by omark On thread : Redundant Calibres

    Tell me your joking???

    Liked On: 10-01-2023, 02:50 PM

15. 
    Matt308 liked post by omark On thread : Winchester 30/30

    If you touch up the areas with some cold blue you might be surprised at the results. Won’t look like brand new but it will look used/period.

    Liked On: 10-01-2023, 12:18 PM

Page 8 of 15 First 123456789101112131415 Last

• Jump to page: