PaulNZ
Member

376 Likes

Page 14 of 26 First 1234567891011121314151617181920212223242526 Last

• Jump to page:

1. 
   rewa liked post by PaulNZ On thread : Walnut Stock Build

   Another few snapshots from the milling for your interest. Note that these are all with the wood still wet – the colour did change considerably after drying. https://i.imgur.com/uGWBeQB.jpg ...

   Liked On: 09-07-2021, 02:06 PM

2. 
   rewa liked post by PaulNZ On thread : Walnut Stock Build

   Inletting of barrelled action and bottom metal has gone as far as I'm going to take it on the mill. Time to break out the inletting black and sharpen up the chisels and scrapers for the final...

   Liked On: 09-07-2021, 01:48 PM

3. 
   HILLBILLYHUNTERS liked post by PaulNZ On thread : Walnut Stock Build

   Inletting of barrelled action and bottom metal has gone as far as I'm going to take it on the mill. Time to break out the inletting black and sharpen up the chisels and scrapers for the final...

   Liked On: 08-07-2021, 08:40 PM

4. 
   Tuidog liked post by PaulNZ On thread : Walnut Stock Build

   Inletting of barrelled action and bottom metal has gone as far as I'm going to take it on the mill. Time to break out the inletting black and sharpen up the chisels and scrapers for the final...

   Liked On: 08-07-2021, 02:09 PM

5. 
   canross liked post by PaulNZ On thread : Baikal single shot rebarrel - Anyone done this?

   Great description of your lapping setup. I've looked into bore lapping before but never actually done it. Considered it for my problematic grey birch barrel to remove the bore constriction, but...

   Liked On: 22-06-2021, 11:59 AM

6. 
   HILLBILLYHUNTERS liked post by PaulNZ On thread : Walnut Stock Build

   Well, after working through a long list of other distractions I've finally made the time to give my stock a bit more attention. Not a whole lot, but at least it's forward progress! Getting ready...

   Liked On: 18-06-2021, 09:27 PM

7. 
   17brno liked post by PaulNZ On thread : Walnut Stock Build

   Well, after working through a long list of other distractions I've finally made the time to give my stock a bit more attention. Not a whole lot, but at least it's forward progress! Getting ready...

   Liked On: 18-06-2021, 08:49 PM

8. 
   Moa Hunter liked post by PaulNZ On thread : Walnut Stock Build

   Well, after working through a long list of other distractions I've finally made the time to give my stock a bit more attention. Not a whole lot, but at least it's forward progress! Getting ready...

   Liked On: 18-06-2021, 07:45 PM

9. 
   Mathias liked post by PaulNZ On thread : Walnut Stock Build

   Well, after working through a long list of other distractions I've finally made the time to give my stock a bit more attention. Not a whole lot, but at least it's forward progress! Getting ready...

   Liked On: 18-06-2021, 04:47 PM

10. 
    Joe_90 liked post by PaulNZ On thread : Walnut Stock Build

    Well, after working through a long list of other distractions I've finally made the time to give my stock a bit more attention. Not a whole lot, but at least it's forward progress! Getting ready...

    Liked On: 17-06-2021, 11:29 PM

11. 
    ROKTOY liked post by PaulNZ On thread : Walnut Stock Build

    Well, after working through a long list of other distractions I've finally made the time to give my stock a bit more attention. Not a whole lot, but at least it's forward progress! Getting ready...

    Liked On: 17-06-2021, 11:12 PM

12. 
    Ryan_Songhurst liked post by PaulNZ On thread : Walnut Stock Build

    Well, after working through a long list of other distractions I've finally made the time to give my stock a bit more attention. Not a whole lot, but at least it's forward progress! Getting ready...

    Liked On: 17-06-2021, 10:32 PM

13. 
    Noswal liked post by PaulNZ On thread : Voere Titan 222

    Very nice. I've been tempted to pick one up myself but I don't really have a need for the calibre at the moment. Would make a nice counterpart for my Voere .22. Interesting that they made their...

    Liked On: 11-06-2021, 02:56 PM

14. 
    Tikka7mm08 liked post by PaulNZ On thread : Tuatahi axe project - small axe / hatchet for hunting, tramping, fishing etc

    Any updates? I've got a birthday coming up, and wife was just asking what I wanted this year... :thumbsup:

    Liked On: 10-06-2021, 02:01 PM

15. 
    tetawa liked post by PaulNZ On thread : Best place to buy Falcon Ultrasteel in Waikato

    Yep, got a slab from Hamill's in Te Awamutu before the season. So far I've fired about half of a single box:( Maybe a bit more action this weekend if I'm lucky.

    Liked On: 24-05-2021, 07:07 PM

Page 14 of 26 First 1234567891011121314151617181920212223242526 Last

• Jump to page: