Pengy
Member

8024 Likes

Page 56 of 535 First ... 64243444546474849505152535455565758596061626364656667686970106156 ... Last

• Jump to page:

1. 
   Pengy liked post by OPO On thread : Generator issues

   If that genny has previously sat around a bit it may well have old fuel-turned to gum in the carb jets, making the engine run lean . a lean engine will surge a bit then give up long before giving you...

   Liked On: 17-05-2023, 10:18 PM

2. 
   Pengy liked post by longshot On thread : Generator issues

   If it is already struggling at 50%, which would be 1200w, then doing the on-off trick to pre warm the elements is very unlikely to work for the 100%. The hunting and surging at 50% informs what...

   Liked On: 17-05-2023, 09:42 PM

3. 
   Pengy liked post by longshot On thread : Generator issues

   When you say the Generator packs a sad, what is the specific nature of the tantrum? Does it trip its breaker but the motor continues running?, or does the motor stall? Or does the generator just...

   Liked On: 17-05-2023, 08:58 PM

4. 
   Pengy liked post by XR500 On thread : Generator issues

   In defence of the cheap chinese generators I did get one and a half houses built with a 3kva 'blackout' labeled generator. Built an open sided tent for the builders a workbench inside and a...

   Liked On: 17-05-2023, 07:47 PM

5. 
   Pengy liked post by Maca49 On thread : Generator issues

   Honda or Dunlite are two good makes, sold heaps of the Hondas, they were assembled in NZ, coupled to an Italian alternator, no longer made, they were an open frame model. Your better with an...

   Liked On: 17-05-2023, 07:46 PM

6. 
   Pengy liked post by Maca49 On thread : Generator issues

   Pengy, by a 6kva good quality unit and walk away. Probably $3-$4k. Or find a good quality secondhand one.

   Liked On: 17-05-2023, 11:43 AM

7. 
   Pengy liked post by Snap 4T On thread : Generator issues

   I stuffed my inverter gen a year ago but the shop fixed it for me I was told I need to double up the req watt for loading up. E.g. 2.4KW heater, you need a 5kw inverter to be on the safe side.

   Liked On: 17-05-2023, 11:42 AM

8. 
   Pengy liked post by MCCPRO On thread : Generator issues

   A 2400w heater off a 3k geny will probably struggle due to the draw. 3 k is peak. If its a variable heater try turning down temp and see if it works. Sent from my SM-N970F using Tapatalk

   Liked On: 17-05-2023, 11:41 AM

9. 
   Pengy liked post by longshot On thread : WHEN THINGs GO WRONG AND YOU END UP PUTTING YOUR LIFE ON THE LINE

   Wow Much of what I would contribute has already been said. I will point out that last night I watched a movie called ‘Fall’. It is about climbing and the title is self explanatory. To the OP,...

   Liked On: 15-05-2023, 08:31 PM

10. 
    Pengy liked post by will.i.em On thread : Another Jafa Safa

    Hi everyone, the name is Willem and as the title alludes to, I'm a South African living in Auckland. Everyone always talks about great hunting in Africa, but I believe we kiwis are the luckiest...

    Liked On: 15-05-2023, 12:35 PM

11. 
    Pengy liked post by Micky Duck On thread : Butcher by trade

    Great intro.funny I sharpened a "really blunt" knife for mate yesterday.took all of 2 minutes till hair shave sharp.some folks just don't have a clue. If haven't got out in next few weeks give me a...

    Liked On: 15-05-2023, 12:32 PM

12. 
    Pengy liked post by Fat belly Dog On thread : Fishing tomorrow!

    Ohiwa Harbour produced the goods again, With an evening low tide last night it was off to a spot on the channel edge to target the last of the outgoing tide and slack water tide into the cool of...

    Liked On: 14-05-2023, 10:18 PM

13. 
    Pengy liked post by Yesmate On thread : WHEN THINGs GO WRONG AND YOU END UP PUTTING YOUR LIFE ON THE LINE

    Well done surviving that there mate.But yea having a beer before the hunt not great.even one can dull senses and relax frame of thought leading costly decisions.Thanks for your honesty,I'm sure...

    Liked On: 14-05-2023, 10:12 PM

14. 
    Pengy liked post by Shanon On thread : Butcher by trade

    Hey all I am looking to gain experience hunting deer mostly. I've been cutting them up for 11 years contract boning I've never shot one (with a bolt gun in the yards I have) I'm keen to share my...

    Liked On: 14-05-2023, 10:07 PM

15. 
    Pengy liked post by MB On thread : Perch?

    It definitely is, but there's no challenge, too easy.

    Liked On: 12-05-2023, 08:47 PM

Page 56 of 535 First ... 64243444546474849505152535455565758596061626364656667686970106156 ... Last

• Jump to page: