PERRISCICABA
Member

3749 Likes

Page 225 of 250 First ... 125175211212213214215216217218219220221222223224225226227228229230231232233234235236237238239 ... Last

• Jump to page:

1. 
   PERRISCICABA liked post by Allgood On thread : My woodhill day.

   We are damned if we do and damned if we don't. :roll: Striking the balance between harvesting enough animals to allow hunters a successful hunt and still retaining enough deer to keep the herd...

   Liked On: 17-08-2014, 02:10 PM

2. 
   PERRISCICABA liked post by Uplandstalker On thread : Crony setup errors

   Found this on a CZ forum and thought it was worth sharing to those check there velocities. Remember that if the bullet flight is not parallel to the centerline of the crony in BOTH axis, an error...

   Liked On: 17-08-2014, 01:40 PM

3. 
   PERRISCICABA liked post by veitnamcam On thread : Pressure / barrel speeds?

   Some rifles its very close and others its miles off. It is only a guide. Sent from my GT-S5360T using Tapatalk 2

   Liked On: 17-08-2014, 01:06 AM

4. 
   PERRISCICABA liked post by rambo-6mmrem On thread : .270 and .223

   yep this is real bench mark 2 data so feel free to use it min is 21gn max being 23.4gn so id load up 5 if each 21gn 21.5gn 22gn 22.5gn 23gn 23.4gn

   Liked On: 16-08-2014, 11:07 PM

5. 
   PERRISCICABA liked post by rambo-6mmrem On thread : .270 and .223

   The 55gn vmax are good but the 53gn is lighter and also has a better bc so will shoot way flatter for shooting little pests i like adi powder normaly bm2 but we have been useing hodgen cfe223 in my...

   Liked On: 16-08-2014, 11:06 PM

6. 
   PERRISCICABA liked post by 257weatherby On thread : Pressure / barrel speeds?

   Am currently working up loads for a 22" barrel .270 also, on a Weatherby Ultralight action, currently at: -150 Berger VLD: 58x2213sc@84 fed210 2900fps 3/4" average (no pressure signs) -140 Berger...

   Liked On: 16-08-2014, 11:01 PM

7. 
   PERRISCICABA liked post by PerazziSC3 On thread : Pressure / barrel speeds?

   yep the round one is from the ejector, the squarish one is from the extractor. I get these marks well before the primers are showing signs of pressure. The bolt lift is *slightly* heavier when im...

   Liked On: 16-08-2014, 11:00 PM

8. 
   PERRISCICABA liked post by Gibo On thread : Pressure / barrel speeds?

   Mmmm ive lost 40fps since summer with my happy load, is that what would be expected?

   Liked On: 16-08-2014, 10:59 PM

9. 
   PERRISCICABA liked post by veitnamcam On thread : Pressure / barrel speeds?

   For the same charge a lighter projectile will move more easily and build less pressure. I think a "fast" or"slow" barrel is probably more to do with variations in chamber and how it shows pressure...

   Liked On: 16-08-2014, 10:56 PM

10. 
    PERRISCICABA liked post by Danny On thread : Little help with chronograph.

    Can whip up some parts if need mate. Sing out.

    Liked On: 16-08-2014, 10:17 AM

11. 
    PERRISCICABA liked post by longrange308 On thread : Little help with chronograph.

    mite be able to help, will let you know tomorrow

    Liked On: 16-08-2014, 12:56 AM

12. 
    PERRISCICABA liked post by bully On thread : Little help with chronograph.

    iv got a pretty good idea of what workshop innovations stock, my wages go direct to that store. I get whats left over for food on a good week.

    Liked On: 15-08-2014, 09:46 PM

13. 
    PERRISCICABA liked post by Gibo On thread : Little help with chronograph.

    Look at you two thinking the same shit at the same time ^^^^ :D

    Liked On: 15-08-2014, 09:46 PM

14. 
    PERRISCICABA liked post by Nibblet On thread : Little help with chronograph.

    Box of beer or bottle of whiskey for your mate and some alloy tube for the chrony??

    Liked On: 15-08-2014, 02:37 PM

15. 
    PERRISCICABA liked post by blake On thread : Hi from Whangarei

    Welcome to the forum WildBull.Saddle up and enjoy the ride yeeeehaaaaa🐂

    Liked On: 15-08-2014, 01:35 PM

Page 225 of 250 First ... 125175211212213214215216217218219220221222223224225226227228229230231232233234235236237238239 ... Last

• Jump to page: