PipIstrelle
Member

59 Likes

Page 1 of 4 1234 Last

• Jump to page:

1. 
   PipIstrelle liked post by 7mmsaum On thread : RCBS F/L die

   A decent tidy of FL die internals can be made with a brake cyl hone in a drill with crc as cutting fluid Just enough to tidy the bore, doesn’t need to remove metal

   Liked On: 09-05-2023, 09:06 AM

2. 
   PipIstrelle liked post by Surat On thread : BSA / Tikka m55 .222 experts

   We have the parts well mag and floor plate we just had no idea of the Value Husky1600 has been very helpful in that we know have a value for the mag but unless we had a cf2 with a busted mag spring...

   Liked On: 28-04-2023, 05:48 AM

3. 
   PipIstrelle liked post by Micky Duck On thread : Load Data Conundrums.

   and as I said in other thread..the ttsx was changed from older barnes projectiles to have more groove n less land.pluss boat tail.so its bearing surface is less/pressure lower...

   Liked On: 26-04-2023, 10:04 PM

4. 
   PipIstrelle liked post by grandpamac On thread : Resized Cartridges Won't Chamber

   Greetings, Agree with most of the above. To me it is a die adjustment issue. Your die may need to make firm contact with the shell holder to size the case, not just touch it. You seem to have two...

   Liked On: 19-04-2023, 06:56 AM

5. 
   PipIstrelle liked post by dannyb On thread : Annealing after sizing?

   Whilst I agree amp is the gold standard, I wouldn't go as far as to say anything else is ineffective, I have been hot salt annealing for a while now and like everything in reloading consistency is...

   Liked On: 18-04-2023, 09:36 PM

6. 
   PipIstrelle liked post by 6.5 CRD On thread : Point of impact change

   Supressor off vs on can certainly change not just POI but group size too. On one of my rifles, I developed a load with a hardy magnum supressor on it, got it shooting .3 moa. When i put my muzzle...

   Liked On: 18-04-2023, 05:16 AM

7. 
   PipIstrelle liked post by Makros On thread : Point of impact change

   Agree with POI being different is normal. I don't agree that it should group the same, taking the suppressor off is a big change of weight hanging off the end of the barrel. It will shoot with...

   Liked On: 18-04-2023, 05:15 AM

8. 
   PipIstrelle liked post by dannyb On thread : Annealing after sizing?

   I've always annealed before sizing, can't say I've heard of annealing after sizing ?

   Liked On: 18-04-2023, 05:04 AM

9. 
   PipIstrelle liked post by Gkp On thread : First outing with the 6mm ARC

   Yeah mate packet ammo

   Liked On: 11-04-2023, 07:09 AM

10. 
    PipIstrelle liked post by Hermitage On thread : Scope suggestions

    I used to think that the lack of a zero stop was the only thing keeping the Sightron SIII from being the perfect scope for a LR hunting rig. Now it's available as the SIII PLR 6-24×50 Zero-Stop...

    Liked On: 10-04-2023, 10:01 PM

11. 
    PipIstrelle liked post by Gkp On thread : First outing with the 6mm ARC

    Another outing with the 6ARC proved it was worthy of taking goats at 450 yards. This time with a better scope, still just using the hold over method so nothing fancy. Very impressive little caliber!

    Liked On: 10-04-2023, 08:02 PM

12. 
    PipIstrelle liked post by Gkp On thread : First outing with the 6mm ARC

    So I couldn't wait for the mini howa to come out in the ARC so I got Greg at Custom Guns to whip up a ruger with a hardy barrel. Very quick turn around, 3 weeks! The idea was so I could go out...

    Liked On: 10-04-2023, 08:00 PM

13. 
    PipIstrelle liked post by grandpamac On thread : Shoulder Bump Advice

    Greetings Dicko, The brass was once fired and Winchester brass. This is some of the thinnest brass and it was not FL sized before loading. its only prep was to chamfer the inside of the mouth. Any...

    Liked On: 10-04-2023, 10:10 AM

14. 
    PipIstrelle liked post by Dicko On thread : Shoulder Bump Advice

    I agree with the above, my experience differs. It easy to try and discount if no improvement. Sent from my iPhone using Tapatalk

    Liked On: 09-04-2023, 06:46 PM

15. 
    PipIstrelle liked post by grandpamac On thread : Shoulder Bump Advice

    Greetings @Piplstrelle, Mostly for my own benefit a short test was carried out. Two once fired .308 cases, previously fired in the .308 were selected and deprimed with a punch set. Case lengths were...

    Liked On: 09-04-2023, 06:44 PM

Page 1 of 4 1234 Last

• Jump to page: