PipIstrelle
Member

41 Likes

Page 1 of 3 123 Last

• Jump to page:

1. 
   Grantn liked post by PipIstrelle On thread : Howa good is your Howa? (picture heavy)

   217689 Trued action , Timney trigger , extended bolt handle and fluted bolt . This used to be a 243 and lived in a bedded GRS laminate hunter . It's now on its third barrel and chambered in 6XC...

   Liked On: 09-05-2023, 04:20 PM

2. 
   Micky Duck liked post by PipIstrelle On thread : BSA / Tikka m55 .222 experts

   There's a company over here has most of the parts , I believe it's www.airgunspares.com . They had the follower , spring , box and bottom metal (minus the flappy bit ) . I searched for BSA CF2...

   Liked On: 24-04-2023, 01:55 PM

3. 
   Gkp liked post by PipIstrelle On thread : First outing with the 6mm ARC

   Cracking result and handloads can only improve on this ��

   Liked On: 11-04-2023, 07:19 AM

4. 
   Sonicjoe liked post by PipIstrelle On thread : Shoulder Bump Advice

   Remove the expander then size a fired case and measure to the shoulder , if the case has grown its the die that's the problem . The problem is caused by the case body being sized and the shoulder not...

   Liked On: 07-04-2023, 09:38 PM

5. 
   Micky Duck liked post by PipIstrelle On thread : making the change from 223 to 6.5grendel (maybe even 6mm arc?)

   In fairness you called it a good few posts back , but I thought the remit was for a mini action. Hence the Grendel and ARC . I've read no end of load data claiming velocities over 3000 fps for the...

   Liked On: 23-03-2023, 10:55 AM

6. 
   Borris liked post by PipIstrelle On thread : Need help with some info from latest hornady book?

   A quick search revealed a screen shot of the Hornady 7-08 load data . As Gerardo suggested it uses the same data and c.o.l as the gmx . I also found the information on a previous thread on the...

   Liked On: 23-03-2023, 09:48 AM

7. 
   MB liked post by PipIstrelle On thread : Recommended air rifle & scope for possum / rabbits

   I've had an Airarms TX200 , Prosport and an HW90 . All were excellent and all are capable of around 16ft/lb of energy . Obviously , over here , we're limited to sub 12ft/lb muzzle energy unless they...

   Liked On: 18-03-2023, 08:31 AM

8. 
   Cordite liked post by PipIstrelle On thread : Recommended air rifle & scope for possum / rabbits

   I've had an Airarms TX200 , Prosport and an HW90 . All were excellent and all are capable of around 16ft/lb of energy . Obviously , over here , we're limited to sub 12ft/lb muzzle energy unless they...

   Liked On: 17-03-2023, 04:31 PM

9. 
   mattstr liked post by PipIstrelle On thread : Ballistics app for using a Swarovski z5

   StrelokPro has SMOA .

   Liked On: 09-03-2023, 02:11 PM

10. 
    Moa Hunter liked post by PipIstrelle On thread : Case lengthening when bump sizing

    Thanks for posting that , though personally I'm not convinced that depiction is completely accurate as the case goes from no contact to perfect fit in one step . The books are on occasion wrong , for...

    Liked On: 04-03-2023, 08:56 PM

11. 
    ebf liked post by PipIstrelle On thread : Case lengthening when bump sizing

    Totally agree on how as the body is sized the case lengthens .�� I'm trying to get a few of the doubters to watch the YouTube video I've listed in #26 . Micky Duck , has the video convinced...

    Liked On: 03-03-2023, 07:50 PM

12. 
    Moa Hunter liked post by PipIstrelle On thread : Soft brass. Random sticky bolt

    A couple of suggestions that may be worth a try . Measure the web adjacent/close to the case head , if there's 0.001" expansion when compared to a new case its over pressure . I believe accepted...

    Liked On: 03-03-2023, 05:28 PM

13. 
    Woody liked post by PipIstrelle On thread : Case lengthening when bump sizing

    Okay , so I apologise for not knowing how to post a link , I'm a technophobe . I found a perfect demonstration on YouTube, the video was posted by "primalrights" and called " Setting Up a...

    Liked On: 03-03-2023, 01:00 PM

14. 
    Tikka7mm08 liked post by PipIstrelle On thread : Moly for barrel?

    I can't give you more than I've read and watched regarding its use . Apparently , it's available as an aerosol which can be sprayed down the barrel and a powder which is applied to the bullets by...

    Liked On: 03-03-2023, 09:41 AM

15. 
    Tikka7mm08 liked post by PipIstrelle On thread : Moly for barrel?

    What about using hBN to dress both bullets and barrel , I bought some and never used it . Using hBN , allegedly improved extreme spread and extra velocity could be achieved . Unfortunately , the...

    Liked On: 03-03-2023, 09:32 AM

Page 1 of 3 123 Last

• Jump to page: