Pommy
Member

148 Likes

Page 6 of 10 First 12345678910 Last

• Jump to page:

1. 
   Pommy liked post by winaa On thread : 168gr Nosler BT

   Pommy, I would send an email to Applied ballistics. I did this for a 7mm bullet a year or two ago and they agreed that there was a database error and fixed it. I can't remember what it was I will...

   Liked On: 20-04-2021, 09:14 AM

2. 
   Pommy liked post by chainsaw On thread : 168gr Nosler BT

   I run 168 NBTs in my 18in bbl 308. Struggled to find independent validated BC, so looking at Litz's data on other NBTs figured that a 5% reduction from Nosler's BC of 0.49 by 5% should be a good...

   Liked On: 20-04-2021, 09:13 AM

3. 
   Pommy liked post by Stocky On thread : Fast twist barrels

   Not quite that assumes that all energy from burnt powder is instantly passed on to the projectile but realistically it has intertia and take time to accelerate similar to dropping a bullet from a...

   Liked On: 13-04-2021, 11:32 AM

4. 
   Pommy liked post by Tahr On thread : .223: The Ins & Outs of it

   Ive always used a .222 or .223 and over the last 12 months have shot 18 deer with my .223's. I have 3 .223's - more by accident than design - but at least it means that I can have certain loads for...

   Liked On: 08-03-2021, 04:58 PM

5. 
   Pommy liked post by Wingman On thread : Paradise Duckling

   One of my broody hens has done a good job of looking after 4 of my orphaned duck eggs.. Another one hatching at the moment.. Its quite comical watching mother hen try and coax the early hatchling...

   Liked On: 19-11-2020, 08:59 AM

6. 
   Pommy liked post by Nick-D On thread : QD mount options for a Bergara BA13 with picatinny rail

   Make sure you bed that rail down. I had to epoxy mine on, base screws would work lose even with loktite

   Liked On: 09-11-2020, 12:14 PM

7. 
   Pommy liked post by JoshC On thread : Long weekend gentlemens hunt

   Haven't been on many multi day hunting trips this year, between working fulltime as well as helping on the farm and having a couple of energetic young boys to entertain I've often been too...

   Liked On: 28-10-2020, 12:51 PM

8. 
   Pommy liked post by tikka On thread : BARNES IN 6.5 GRENDEL

   Being a Grendel I’d say the lighter 100gr would be the go on deer and pigs at around 2700-2800 fps.

   Liked On: 15-10-2020, 07:22 AM

9. 
   Pommy liked post by Mathias On thread : Who's used a Kaimai suppressor?

   Pretty sure they are, labelled as Silenz. I stand to be corrected tho'. Stick to what you know best, I'd say.

   Liked On: 26-08-2020, 02:19 PM

10. 
    Pommy liked post by chainsaw On thread : 284 win vs 280ai

    Should not be an issue with feeding, you might have to open up the lips on the mag slightly for284 but not a show stopper. I’m not a gun smith but I’d be asking another Smith for a 2nd opinion. 284...

    Liked On: 11-08-2020, 11:25 AM

11. 
    Pommy liked post by The Claw On thread : Barnard Action Hunting Rifle

    Dean has built 3 rifles for me now, definitely worth the wait. I'm starting to build up a selection of reamers and putting pressure on my brother to buy a lathe. He's a trained tool...

    Liked On: 01-08-2020, 12:17 AM

12. 
    Pommy liked post by Micky Duck On thread : Barnes TTSX

    sounds to me like pretty much any cup n core jobbie would do what you asking....hornady interlock etc etc....personally I believe too many folks have gone too far down the rabbit hole of search for...

    Liked On: 31-07-2020, 09:13 AM

13. 
    Pommy liked post by Gerardo On thread : Any 284 shooters have used 168gr bergers

    To the 284 brethren, I put the Berger 168s hybrids to the test. 25.5 inch barrel, 8.5 twist Lapua 6.5 necked up Fed match primer 15 thou off the lands 57.5 gr RL26 SD 7 3000ish ft/s...

    Liked On: 26-07-2020, 04:17 PM

14. 
    Pommy liked post by kiwiazonic On thread : Too fast and dangerous? 7mm Rem Mag, 180gr ELD-M, RL26

    Around .030" jump, which is a lot but my Mag can only accept a COAL of 3.4 so I stick below that.

    Liked On: 21-07-2020, 11:31 AM

15. 
    Pommy liked post by Wingman On thread : Quality "everlasting" .410 shells

    Before I even get started on this thread I would like to point out that Micky Duck was totally responsible fore sending me down this rabbit hole. I was quite happy shooting factory loaded .410 ammo...

    Liked On: 19-07-2020, 12:22 AM

Page 6 of 10 First 12345678910 Last

• Jump to page: