I have one in .44. It is very accurate and very easy to carry around. Mine came with screws that were too short holding the rail on, these got replaced under warranty. Also if you are going to...
Liked On: 26-09-2023, 04:48 AM
Mate that's a Viet Nam era sleeping bag cover. I'd offer it up to a museum if I were you:P
Liked On: 14-09-2023, 11:45 AM
Hey team, So I finally managed a sub moa group. 233018 A bit of back story, it's been over a year of shooting at least one competition a month at the local deerstalkers (having never shot rifle...
Liked On: 12-09-2023, 11:16 PM
Talleys They just work.
Liked On: 12-09-2023, 05:46 PM
233116
Liked On: 12-09-2023, 04:09 PM
Grc are about 1200/1250 i believe. And yes they can inlet for a rem 7 . They can 3D scan pretty much any action and adapt the inleting to the stock within reason. You can have a standard inlet or an...
Liked On: 31-08-2023, 08:30 PM
+1 for the sndway. I got one a while back to get me through until i could get a "good" one. 4 years on i cant justify the upgrade. Ranges within a couple meters to my mates leupold at less than a 5th...
Liked On: 11-08-2023, 04:51 PM
I think Maxx lives in your general area and he uses them.
Liked On: 04-08-2023, 03:22 PM
About $62-$65 per 100 Sent from my CPH2145 using Tapatalk
Liked On: 04-08-2023, 03:22 PM
69 Targex are the go.
Liked On: 03-08-2023, 10:53 PM
I use these in my 18in tikka. No issues. Target at 100mtrs with the 73g ELD m. Shot off to the right is a different weight bullet. 230318
Liked On: 03-08-2023, 03:36 PM
nope....not going to happen UNTIL you have learnt to shoot accurately and consistantly...unless you can guarantee to pop that foot ball at a given range,you have no place to be attempting to shoot an...
Liked On: 31-07-2023, 11:04 PM
Few points: M7's are designed around a 2.8" COAL, and use standard Remington 700 S/A magazine boxes and springs (the only part which is compatible between models). Your .223 can be lengthened...
Liked On: 31-07-2023, 11:02 PM
Only shot it with Fed Blue Box disregard group on left its from my 243 230049
Liked On: 31-07-2023, 09:30 PM
I have a CDI mag kit for AICS mags, CDI no longer exists but there are other option (e.g. Badger) you could remove the block from the rear of the factory mag and either replace it, just a bit...
Liked On: 31-07-2023, 07:49 PM