Offset aside, very nice grouping if you put the shots all together. Unlikely to to be canting though isn't it at 100yds when the bullet fall is only 70-80mm. 10-15mm to the left would require...
Liked On: 29-07-2017, 05:21 PM
Offset aside, very nice grouping if you put the shots all together. Unlikely to to be canting though isn't it at 100yds when the bullet fall is only 70-80mm. 10-15mm to the left would require...
Liked On: 29-07-2017, 04:43 PM
Offset aside, very nice grouping if you put the shots all together. Unlikely to to be canting though isn't it at 100yds when the bullet fall is only 70-80mm. 10-15mm to the left would require...
Liked On: 29-07-2017, 04:24 PM
(reprinted from a Hutt Valley NZDA distribution to members earlier today) The Lower North island Red Deer Foundation had its day in court Wednesday 2nd May, finally (take 2 scene 1) ...
Liked On: 27-07-2017, 08:55 PM
I commented in a recent thread to ebf when he raised this method that we should give it a general airing on the forum. So who has tried it and how did it work out for you? A description can...
Liked On: 23-07-2017, 06:25 PM
I checked a couple of loads at Kaitoke yesterday afternoon in perfect conditions; no wind and overcast. The long range hunting project is shooting well and as usual there is no way I can keep up....
Liked On: 19-07-2017, 09:40 PM
Agree. I'm assuming that time is fixed, but no figure has been given, and then the crossing of the data plots in figure 10-33 is unintuitive. Also online searches reveal a differing in opinion over...
Liked On: 16-07-2017, 08:27 PM
New Lapua brass can be quite undersized in the neck generating heavy neck tension. Some seating dies may deal with this better than others. Things could straighten up on once-fired brass when you get...
Liked On: 16-07-2017, 12:05 AM
New Lapua brass can be quite undersized in the neck generating heavy neck tension. Some seating dies may deal with this better than others. Things could straighten up on once-fired brass when you get...
Liked On: 14-07-2017, 10:00 PM
Thanks Guys, some useful information. This is a great topic and now that we have grown tired of discussing ladders, OBT, OCW, and 3-shot groups, doesn't this deserve its own thread at some...
Liked On: 13-07-2017, 07:21 PM
I've offered to help out at one of the stations and do some spotting for you guys as required. To be clear that means in this case confirming where shots have hit. It will be good to put some names...
Liked On: 08-07-2017, 12:21 AM
I've offered to help out at one of the stations and do some spotting for you guys as required. To be clear that means in this case confirming where shots have hit. It will be good to put some names...
Liked On: 07-07-2017, 10:19 PM
If going with a short action then - as has been pointed out - the 6.5x47 gives the most flexibility for bullet seating. To provide some figures I load 140gr VLDs out to 71mm (70.6mm is just touching...
Liked On: 05-07-2017, 08:04 AM
Agree. I'm assuming that time is fixed, but no figure has been given, and then the crossing of the data plots in figure 10-33 is unintuitive. Also online searches reveal a differing in opinion over...
Liked On: 04-07-2017, 02:08 PM
For steels, not for brass according to the literature. Not completely unfortunately. The head around the perimeter for the few millimetres where it emerges from the chamber - from the upper...
Liked On: 04-07-2017, 02:03 PM