quentin
Member

989 Likes

Page 66 of 66 First ... 16525354555657585960616263646566

• Jump to page:

1. 
   Sideshow liked post by quentin On thread : What little pesties did you bowl over today?

   Pesky magpies have figured out that I'm the reason their numbers are diminishing. They now will not come within 50 meters of the house, so popping them out of the kitchen window is a thing of the...

   Liked On: 11-02-2016, 09:15 AM

2. 
   Danny liked post by quentin On thread : What target design and why ?

   6x47 and 10-ring seem to have it sorted. I find the diamond the easiest to center with a basic duplex reticle.

   Liked On: 04-02-2016, 09:08 PM

3. 
   6mm ackley liked post by quentin On thread : I will never turn my nose up at eating rabbit again

   I bone them out, and vacuum seal them before putting in the freezer. I get about 400 - 500gm of meat off each rabbit, so tend to be a really good size for a couple of meals. I just substitute...

   Liked On: 28-01-2016, 02:35 PM

4. 
   7mmsaum liked post by quentin On thread : I will never turn my nose up at eating rabbit again

   I bone them out, and vacuum seal them before putting in the freezer. I get about 400 - 500gm of meat off each rabbit, so tend to be a really good size for a couple of meals. I just substitute...

   Liked On: 28-01-2016, 02:17 PM

5. 
   MB liked post by quentin On thread : Subsonic 22LR round for hunting?

   Found the chrony when looking for the eley ammo which was a bonus. The rifle has a few hundred more rounds through it, and the groups are coming in a bit from the last time I tried all of the...

   Liked On: 21-01-2016, 08:34 PM

6. 
   308 liked post by quentin On thread : What would you really like in your collection - if funds were no issue

   One of Scott Traills lightweight carbines, with a March 2.5-25 x 42 scope. 44863

   Liked On: 20-01-2016, 08:32 PM

7. 
   dirtyhabit liked post by quentin On thread : Suppressor threading

   If you do not need to get this done in Auckland, then +1 for Scott Traill at SSRNZ

   Liked On: 06-01-2016, 04:40 PM

8. 
   PERRISCICABA liked post by quentin On thread : BEDDING!

   Three rules I (now) follow. 1. Strip the action of trigger etc, and fill all holes in the action with putty, tape, plasticine etc. 2. Wax, and wax again just to be sure, anything that will come in...

   Liked On: 06-01-2016, 03:36 PM

9. 
   grunzter liked post by quentin On thread : Ar15 scopes

   Its an IOR 2-12 x 32. 35mm main tube so plenty of elevation and windage adjustment. Eye relief - 3.5" I managed to get this on the AR without requiring a cantilevered scope base. 42816

   Liked On: 23-11-2015, 05:10 PM

10. 
    res liked post by quentin On thread : Ar15 scopes

    Its an IOR 2-12 x 32. 35mm main tube so plenty of elevation and windage adjustment. Eye relief - 3.5" I managed to get this on the AR without requiring a cantilevered scope base. 42816

    Liked On: 23-11-2015, 02:51 PM

11. 
    Tommy liked post by quentin On thread : Ar15 scopes

    Its an IOR 2-12 x 32. 35mm main tube so plenty of elevation and windage adjustment. Eye relief - 3.5" I managed to get this on the AR without requiring a cantilevered scope base. 42816

    Liked On: 23-11-2015, 02:38 PM

12. 
    Scouser liked post by quentin On thread : AR Photo Only Thread

    Finally got my 300 Blackout put together. It's something of a frankengun. Last job is to get a trigger that is not gritty and super heavy. 40370

    Liked On: 09-09-2015, 11:15 AM

13. 
    grunzter liked post by quentin On thread : AR Photo Only Thread

    Finally got my 300 Blackout put together. It's something of a frankengun. Last job is to get a trigger that is not gritty and super heavy. 40370

    Liked On: 06-09-2015, 08:31 PM

14. 
    res liked post by quentin On thread : AR Photo Only Thread

    Finally got my 300 Blackout put together. It's something of a frankengun. Last job is to get a trigger that is not gritty and super heavy. 40370

    Liked On: 06-09-2015, 08:17 PM

Page 66 of 66 First ... 16525354555657585960616263646566

• Jump to page: