quentin
Member

728 Likes

Page 1 of 49 123456789101112131415 ... Last

• Jump to page:

1. 
   quentin liked post by tommygun On thread : Flush fitting internal mag for Howa mini

   271298271299 Just a little something I've been working on. 3d printing prototypes at the moment. The mag body fits into the original mag well and is retained by the factory magazine catch pin. Also...

   Liked On: Today, 07:37 AM

2. 
   quentin liked post by robhughes-games On thread : Kiwi made Howa mini ultralight chassis a reality?

   I have a design done up for one. It's a fair bit more machine work. 271206

   Liked On: Yesterday, 09:50 AM

3. 
   quentin liked post by robhughes-games On thread : Howa Superlite aluminium bottom metal

   It's taken a while, but the superlite bottom metals are coming off the machine. These ones will take the factory mags. The likelihood of doing a blind version is low for now. I've found that the...

   Liked On: 21-03-2025, 10:29 AM

4. 
   quentin liked post by SixtyTen On thread : 3D printed 22lr suppressor

   PLA will still be fine for around 1.8mm wall thickness, its a bit less heat tolerant than ABS or other high temp filaments. Carbon is just an additive to the plastic filament, offers a small increase...

   Liked On: 13-03-2025, 02:16 PM

5. 
   quentin liked post by Beavis On thread : Forwarding Firearms Parts From Customs

   I'm actually considering writing to the Minister responsible to see if we can get this sorted. It is unacceptable.

   Liked On: 12-03-2025, 12:48 PM

6. 
   quentin liked post by csmiffy On thread : 3D printed 22lr suppressor

   There was/is a slip on PVC suppressor made in NZ. I'm sure you could thin that plastic our heaps if that worked

   Liked On: 12-03-2025, 12:41 PM

7. 
   quentin liked post by No.3 On thread : 3D printed 22lr suppressor

   Definitely. I'm waiting for the metal additive printers to become realistic for home users, there's no end to the things you could make for yourself then!

   Liked On: 12-03-2025, 12:41 PM

8. 
   quentin liked post by SixtyTen On thread : 3D printed 22lr suppressor

   Looks like an interesting design. It would be interesting to meter that against a more traditional baffle stack and see if its any better. I have found a wall thickness of 1.5mm when printing with...

   Liked On: 11-03-2025, 06:39 PM

9. 
   quentin liked post by Sh00ter On thread : 3D printed 22lr suppressor

   Thats pretty cool. I think we are about to enter a very interesting time in regards to 3d printed accessories and not just for firearms. imagine going on the magpul website and instead of buying a...

   Liked On: 11-03-2025, 06:03 PM

10. 
    quentin liked post by Stocky On thread : The Howikka Test Bed

    So I recently setup a new 223 now I've run the Tikka a year and am happy to hunt with it almost exclusively. The new rifle is as follows: A Modified Stainless Howa Mini action with a take off...

    Liked On: 07-03-2025, 07:55 AM

11. 
    quentin liked post by 55six On thread : Shot Show 2025

    We recently attended Shot Show 2025 in Las Vegas. It was a great opportunity to catch up with the brands we distribute and check out their latest products. ARKEN / DNT DNT was definitely the...

    Liked On: 04-02-2025, 09:12 AM

12. 
    quentin liked post by zeropak On thread : Sorry another Thermal question

    scanning for animals with a scope is a breach of rule 2 of the firearms safety code which says "always point your rifle in a safe direction." Not really a good idea for that reason alone.

    Liked On: 03-02-2025, 07:44 AM

13. 
    quentin liked post by Happy Jack On thread : DoC Hunting Permit Survey

    My answer to that question was along the lines. You want us to do your work and then pay for the privilege.

    Liked On: 02-02-2025, 08:52 AM

14. 
    quentin liked post by blip On thread : Tips for improving shooting technique

    Id be hesitant to do dry firing practice with a rimfire.

    Liked On: 21-01-2025, 02:29 PM

15. 
    quentin liked post by 55six On thread : Hunting Tripods

    Our Sunwayfoto hunting tripods are one of our hottest products right now. Tripod hunting is definitely taking off. 4 out the door this morning alone. Darren does a review on the tall model in his...

    Liked On: 16-01-2025, 08:22 AM

Page 1 of 49 123456789101112131415 ... Last

• Jump to page: