r87mm
Member

214 Likes

Page 13 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   madjon_ liked post by r87mm On thread : 7mm Rem Mag sizing problems

   I'd try to borrow another die/dies of different brands and see if you get the same out come. This will tell you if your chamber is slightly over size or reloads are a bit hot and you're getting a bit...

   Liked On: 06-04-2018, 08:33 AM

2. 
   57jl liked post by r87mm On thread : Molesworth Ballot 2018

   Was in there a month or so ago in one of the southern blocks after geese. A little bit of pig sign and a few deer carcasses and virtually no goats. Been into this spot before and there was a small...

   Liked On: 24-03-2018, 09:30 PM

3. 
   Reindeer liked post by r87mm On thread : Molesworth Ballot 2018

   Was in there a month or so ago in one of the southern blocks after geese. A little bit of pig sign and a few deer carcasses and virtually no goats. Been into this spot before and there was a small...

   Liked On: 24-03-2018, 03:55 PM

4. 
   csmiffy liked post by r87mm On thread : Molesworth Ballot 2018

   This repellent that everyone talks about,what is it? Last I heard or read somewhere in the last few years was that it was a wives tail and no such thing exists and not much has been put into...

   Liked On: 24-03-2018, 03:14 PM

5. 
   csmiffy liked post by r87mm On thread : Molesworth Ballot 2018

   Was in there a month or so ago in one of the southern blocks after geese. A little bit of pig sign and a few deer carcasses and virtually no goats. Been into this spot before and there was a small...

   Liked On: 24-03-2018, 12:57 PM

6. 
   Steve123 liked post by r87mm On thread : Molesworth Ballot 2018

   Was in there a month or so ago in one of the southern blocks after geese. A little bit of pig sign and a few deer carcasses and virtually no goats. Been into this spot before and there was a small...

   Liked On: 24-03-2018, 12:02 PM

7. 
   veitnamcam liked post by r87mm On thread : Molesworth Ballot 2018

   Was in there a month or so ago in one of the southern blocks after geese. A little bit of pig sign and a few deer carcasses and virtually no goats. Been into this spot before and there was a small...

   Liked On: 24-03-2018, 08:57 AM

8. 
   veitnamcam liked post by r87mm On thread : Series 80 LandCruiser power

   All good advice but always start at the cheapest and easiest first. Don't forget the air element as I've seen them in trucks look good but suck them selves flat and restrict air under load to give...

   Liked On: 25-02-2018, 12:52 PM

9. 
   Cyclops liked post by r87mm On thread : Series 80 LandCruiser power

   All good advice but always start at the cheapest and easiest first. Don't forget the air element as I've seen them in trucks look good but suck them selves flat and restrict air under load to give...

   Liked On: 24-02-2018, 10:11 PM

10. 
    kokako liked post by r87mm On thread : Series 80 LandCruiser power

    All good advice but always start at the cheapest and easiest first. Don't forget the air element as I've seen them in trucks look good but suck them selves flat and restrict air under load to give...

    Liked On: 24-02-2018, 05:11 PM

11. 
    Plinky liked post by r87mm On thread : 200 gn eld-x 300 win mag AR2225 starting loads

    Yep to little can cause problems but you need a big air space for detonation. As I'm running 75.5 with a bullet 25gns heavier and the others are running 80+ then I'd start at 76-78 and work up in the...

    Liked On: 20-02-2018, 06:03 PM

12. 
    Plinky liked post by r87mm On thread : 200 gn eld-x 300 win mag AR2225 starting loads

    Getting 2800 with 75.5gns of 2225 norma cases 215 primers and 225eldm's 24" barrel.Haven't tried to push for more speed as it will do all I need. I see I went to 78gns with the 208 amax and about the...

    Liked On: 18-02-2018, 11:28 PM

13. 
    WallyR liked post by r87mm On thread : A bit of 7mm advice

    Try the Berger 168 classic Hunter as they Aren't as pointy so will get you closer to the lands. They like jump so are very forgiving. I have a 1-9.5 twist and the 180 eldm are shooting well but...

    Liked On: 18-02-2018, 02:58 PM

14. 
    Pointer liked post by r87mm On thread : goose loads 2

    For those interested I took on board some of the good advice I got and then decided to to do a small unscientific test hoping to change others in our group thoughts on steel or not. This is what I...

    Liked On: 05-02-2018, 08:44 PM

15. 
    Bernie liked post by r87mm On thread : goose loads 2

    For those interested I took on board some of the good advice I got and then decided to to do a small unscientific test hoping to change others in our group thoughts on steel or not. This is what I...

    Liked On: 27-01-2018, 10:01 PM

Page 13 of 15 First 123456789101112131415 Last

• Jump to page: