r87mm
Member

214 Likes

Page 14 of 15 First 123456789101112131415 Last

• Jump to page:

1. 
   Micky Duck liked post by r87mm On thread : goose loads 2

   For those interested I took on board some of the good advice I got and then decided to to do a small unscientific test hoping to change others in our group thoughts on steel or not. This is what I...

   Liked On: 27-01-2018, 07:29 PM

2. 
   jakewire liked post by r87mm On thread : goose loads 2

   For those interested I took on board some of the good advice I got and then decided to to do a small unscientific test hoping to change others in our group thoughts on steel or not. This is what I...

   Liked On: 27-01-2018, 01:14 PM

3. 
   Mooseman liked post by r87mm On thread : School holiday shooting practice

   Took my 14 year old daughter to the range with me. With the .22 she could hit the plates at 25-30 yards so both of us were pretty happy. She used to come hunting with me when she was little and if...

   Liked On: 24-01-2018, 07:40 PM

4. 
   berg243 liked post by r87mm On thread : School holiday shooting practice

   Took my 14 year old daughter to the range with me. With the .22 she could hit the plates at 25-30 yards so both of us were pretty happy. She used to come hunting with me when she was little and if...

   Liked On: 24-01-2018, 03:31 PM

5. 
   Sideshow liked post by r87mm On thread : Balance scale calibration

   I agree with whats been said but due to the difference between my electric and beam scales I've ordered a set of test weights. My been scales did slightly alter ( not as bad as electric do)but an...

   Liked On: 24-01-2018, 06:50 AM

6. 
   Cordite liked post by r87mm On thread : Balance scale calibration

   I agree with whats been said but due to the difference between my electric and beam scales I've ordered a set of test weights. My been scales did slightly alter ( not as bad as electric do)but an...

   Liked On: 23-01-2018, 11:35 PM

7. 
   GWH liked post by r87mm On thread : School holiday shooting practice

   Took my 14 year old daughter to the range with me. With the .22 she could hit the plates at 25-30 yards so both of us were pretty happy. She used to come hunting with me when she was little and if...

   Liked On: 23-01-2018, 07:40 PM

8. 
   Cordite liked post by r87mm On thread : Dented case mouths

   Using a saddle mount. Was just using up the hornady from a 50 packet I got. No intention to reload them, I'll use fed but mostly the geco as I have plenty. The biggest problem is I now have a new...

   Liked On: 01-01-2018, 08:22 PM

9. 
   MGNZ liked post by r87mm On thread : General approach to powder selection for a new load

   I agree with what's been said. I look for the top three powders in the book with good case fill and speed and then check the sites on the net to verify if others are using the same powders with good...

   Liked On: 28-11-2017, 10:17 AM

10. 
    Biggun708 liked post by r87mm On thread : Gongs...

    Was using 400bis for my 600m gong(what engineer said it was). 7mm rem 160-162 tmk,amax just chipped paint. eldx sometimes put a small dent. 300win mag 225 eldm almost went through! Can't rmbr whether...

    Liked On: 18-11-2017, 04:49 PM

11. 
    Steve123 liked post by r87mm On thread : Crappy Tikka T3 barrels??

    I would remove the barrel straight away before you wear it out as you know it's a great shooter. Then replace with an expensive unknown barrel that you need to spend heaps on trying to get it to...

    Liked On: 11-11-2017, 04:37 PM

12. 
    northdude liked post by r87mm On thread : Crappy Tikka T3 barrels??

    I would remove the barrel straight away before you wear it out as you know it's a great shooter. Then replace with an expensive unknown barrel that you need to spend heaps on trying to get it to...

    Liked On: 11-11-2017, 09:17 AM

13. 
    GWH liked post by r87mm On thread : Crappy Tikka T3 barrels??

    I would remove the barrel straight away before you wear it out as you know it's a great shooter. Then replace with an expensive unknown barrel that you need to spend heaps on trying to get it to...

    Liked On: 11-11-2017, 09:11 AM

14. 
    PERRISCICABA liked post by r87mm On thread : Bergara B14 HUNTER

    Yep got one in 300wm. Didn't like the trigger as was a bit heavy so put a second hand timney on it. Shoots pretty similar to yours by the looks. The original owner put a light weight alloy mag...

    Liked On: 28-10-2017, 04:10 PM

15. 
    PERRISCICABA liked post by r87mm On thread : .243 for 500m shots

    I'd go for the 4570. Let's face it at 300;yards on a smaller animal with a .243 job done. Now throwing a brick that far and expecting to hit it well that's a whole different story. Not against 243's...

    Liked On: 22-09-2017, 12:20 PM

Page 14 of 15 First 123456789101112131415 Last

• Jump to page: