R93
Member

8199 Likes

Page 4 of 547 First 12345678910111213141516171854104504 ... Last

• Jump to page:

1. 
   WildBrad liked post by R93 On thread : 6.5 cm case capacity

   Havent done it to a creed myself but maybe get a drop tube and even trickle the powder from your pan into that. Dont dump it. It will still be compressed but you should be able seat a berger Sent...

   Liked On: 06-02-2021, 05:21 PM

2. 
   Micky Duck liked post by R93 On thread : 6.5 cm case capacity

   Havent done it to a creed myself but maybe get a drop tube and even trickle the powder from your pan into that. Dont dump it. It will still be compressed but you should be able seat a berger Sent...

   Liked On: 06-02-2021, 04:19 PM

3. 
   r87mm liked post by R93 On thread : Load Development - Velocity vs Accuracy

   Can I ask what barrel and length you're running in your 06? If your not shooting past 500 have you considered going to a 130 like the scirocco or berger? I would be frustrated with a 40fps ES...

   Liked On: 06-02-2021, 08:45 AM

4. 
   dannyb liked post by R93 On thread : Load Development - Velocity vs Accuracy

   Can I ask what barrel and length you're running in your 06? If your not shooting past 500 have you considered going to a 130 like the scirocco or berger? I would be frustrated with a 40fps ES...

   Liked On: 06-02-2021, 08:22 AM

5. 
   Tim Dicko liked post by R93 On thread : Load Development - Velocity vs Accuracy

   Can I ask what barrel and length you're running in your 06? If your not shooting past 500 have you considered going to a 130 like the scirocco or berger? I would be frustrated with a 40fps ES...

   Liked On: 05-02-2021, 08:49 PM

6. 
   chainsaw liked post by R93 On thread : Load Development - Velocity vs Accuracy

   I had a 26" and loaded for a mate with a 24" in 6.5-06 His 24" was as fast as my barrel with same load. N560 worked for us if you get a chance to try it. That is if you haven't already. I miss my...

   Liked On: 05-02-2021, 08:28 PM

7. 
   WillB liked post by R93 On thread : Digital Scales - What's a good higher end option?

   I have used pretty much every cheap or middle of the road dispenser and scale system there is. Have personally owned Lyman, Pact, Rcbs and now frankford. So far for me, the Frankford has been the...

   Liked On: 05-02-2021, 01:39 PM

8. 
   Cyclops liked post by R93 On thread : New to reloading - to what fraction of a grain do you test new loads? 0.5gr, 0.3gr...

   If starting out I would go along with the advice of a good beam scale and trickler. However you will eventually get sick of it in a year or so and go electronic. And if you know what your doing...

   Liked On: 01-02-2021, 07:08 PM

9. 
   distant stalker liked post by R93 On thread : Bushcraft

   I have lived half a century and spent all lot of that time in the bush both recreationally and professionally. We never stop learning and I have just found a few new angles and curves on a YouTube...

   Liked On: 31-01-2021, 06:54 PM

10. 
    Sako851 liked post by R93 On thread : Bushcraft

    I have lived half a century and spent all lot of that time in the bush both recreationally and professionally. We never stop learning and I have just found a few new angles and curves on a YouTube...

    Liked On: 31-01-2021, 08:36 AM

11. 
    veitnamcam liked post by R93 On thread : 260 terminator by defensive edge

    I run a standard 40° shoulder 260 improved in 2 rifles. Using RL 26 and 2 different brand 23" barrels,130 VLD hunting Berger. I get 3120 fps in both of them with good case life, ES and excellent...

    Liked On: 30-01-2021, 07:42 AM

12. 
    25 /08 IMP liked post by R93 On thread : 260 terminator by defensive edge

    Before RL26 I wished I just bought a standard 260 for all the fucking around fireforming etc. I didnt see any significant gains over a standard either. Sent from my SM-T510 using Tapatalk

    Liked On: 29-01-2021, 07:44 PM

13. 
    Ben_welder liked post by R93 On thread : 260 terminator by defensive edge

    I run a standard 40° shoulder 260 improved in 2 rifles. Using RL 26 and 2 different brand 23" barrels,130 VLD hunting Berger. I get 3120 fps in both of them with good case life, ES and excellent...

    Liked On: 29-01-2021, 02:31 PM

14. 
    Mathias liked post by R93 On thread : 260 terminator by defensive edge

    I run a standard 40° shoulder 260 improved in 2 rifles. Using RL 26 and 2 different brand 23" barrels,130 VLD hunting Berger. I get 3120 fps in both of them with good case life, ES and excellent...

    Liked On: 29-01-2021, 12:59 PM

15. 
    Jake77 liked post by R93 On thread : Thar sasauges?

    Just garlic, chilli and some extra fat. Cant go wrong. I mix thar with chamois. Only way to eat mature bucks and bulls is in a sausage.[emoji16] Sent from my SM-T510 using Tapatalk

    Liked On: 26-01-2021, 10:51 PM

Page 4 of 547 First 12345678910111213141516171854104504 ... Last

• Jump to page: