raspy
Member

56 Likes

Page 3 of 4 First 1234 Last

• Jump to page:

1. 
   raspy liked post by PadLo On thread : Inertia bullet puller

   My last 2 Ali orders have got to NZ in 3 days, then took 6 days from Auckland to Chch..............:wtfsmilie:

   Liked On: 22-12-2021, 04:56 PM

2. 
   raspy liked post by Hg1990 On thread : Thank you - First Handloads

   Finalised my load for now, completed the last few seating depth tests and then shot multiple groups at 100m & 200m of my confirmed load. Tests done in same conditions (Shooting off pack at 100m) ...

   Liked On: 06-11-2021, 08:58 PM

3. 
   raspy liked post by Makros On thread : Reloading data stickers

   Hi all, I'm a bit anal when it comes to data and like to keep notes in the cartridge cases I store reloads in (MTM mostly although have some ADG brass boxes of similar ilk). I got a bit over...

   Liked On: 02-11-2021, 07:59 PM

4. 
   raspy liked post by Mackattack On thread : Model 7 7mm08 150gn eldx load development

   Finaly got out to test my loads using 2206h rifle is a Tikka t3x with 20" barrel my coal was 71.7mm Winchester brass fed primers I started at 39 and went to 40.5 in .5 Increments 39= 2703fps with...

   Liked On: 07-10-2021, 05:05 PM

5. 
   raspy liked post by Mooseman On thread : This is how you hunt

   You are so right , I suppose the only good thing to come out of it is the deer will be fatter nextime.

   Liked On: 05-10-2021, 07:39 PM

6. 
   raspy liked post by Hg1990 On thread : Thank you - First Handloads

   Another Update - finalised charge weight and first seating depth tests done! Went ahead and tested velocity at 43.0gr & 43.1gr to confirm that it was a stable spot for my charge weight, results...

   Liked On: 03-10-2021, 07:37 PM

7. 
   raspy liked post by Hg1990 On thread : Thank you - First Handloads

   Update - So my magnetospeed arrived and I’ve got the results of my charge weight testing done! 178506 Ruger American Hunter Rifle - 20inch Barrel All rounds seated at 2.175” (max mag length)...

   Liked On: 13-09-2021, 08:05 PM

8. 
   raspy liked post by Rock river arms hunter On thread : Model 7 7mm08 150gn eldx load development

   A mate of mine has asked me to load for his 7mm08 Tikka. Managed to grab a tub of IMR 4166 Enduro. 154gr ssts. Hornady once fired cases and a nice set of RCBS dies from gunworks which got here in...

   Liked On: 04-09-2021, 12:16 PM

9. 
   raspy liked post by Rock river arms hunter On thread : 7mm08 ideas

   Hey folks cheers for the replies. I've ended up getting some 154gr sst which will do the job nicely. I'll also load some 150gr Gamekings as a backup load. My mate is sorting through brass so...

   Liked On: 28-08-2021, 08:15 PM

10. 
    raspy liked post by chainsaw On thread : 180ELDMs in 284 and RL26

    Decided a while back to play around with 180 ELDMs and RL26 in my Tikka 284 22in bbl. Already had some great loads developed with 162 AMAX and TMKs but based on some data provided by GWH I thought...

    Liked On: 25-08-2021, 11:11 PM

11. 
    raspy liked post by Backsteaks On thread : 168 TMK in 308 load development

    Have recently finished my very basic load development for the 168 grain Sierra tipped match king getting pushed by 2208 in my old Tikka t3 .308 with a 22” barrel and DPT supressor. Before starting...

    Liked On: 25-08-2021, 11:10 PM

12. 
    raspy liked post by averageoutdoorsman On thread : Model 7 7mm08 150gn eldx load development

    Definitely consider 3-15, plenty of affordable good quality options available for it, can shoot 800+ yards comfortably at 15 power if you bother with steel or long range wallabies etc. Shortest i've...

    Liked On: 14-08-2021, 11:25 PM

13. 
    raspy liked post by dannyb On thread : Model 7 7mm08 150gn eldx load development

    Yup I'm not in a hurry, I've had big long range scope before and that's certainly not what I'm after. The 2.5-10×44 Monarch thats currently on it is a bloody good match. Ideally if I could lay my...

    Liked On: 09-08-2021, 08:52 AM

14. 
    raspy liked post by dannyb On thread : Model 7 7mm08 150gn eldx load development

    Took the latte rifle out for a walk this weekend and shot 2 fallow yearlings at 311 and 330 yards, both bang flops and the damage to the wee fallow front shoulders was brutal....I almost felt over...

    Liked On: 08-08-2021, 09:20 AM

15. 
    raspy liked post by Nathan F On thread : Reloading area

    I brought a computer desk of trade me a while back. I’ve cleared my bench in the workshop finally and set up the desk Dedicated to reloading. Also had the opportunity to stocktake while I was at...

    Liked On: 02-08-2021, 03:12 PM

Page 3 of 4 First 1234 Last

• Jump to page: