Yup
Liked On: 25-12-2022, 11:11 AM
Something like this would be way claasier than a howa https://www.trademe.co.nz/a/marketplace/sports/hunting-shooting/rifles/centrefire/listing/3913714298 Mine is the ultralight that has the same...
Liked On: 25-12-2022, 10:18 AM
That’d be achievable with a t3 maybe depending on scope can and rings
Liked On: 24-12-2022, 09:01 PM
The Bergara is way heavier. The specs are for the 6.5 Creed and 308 which have a shorter barrel. Mine was pretty heavy. Shot bloody good but with a fairly hefty barrel profile its heavy. Most of the...
Liked On: 24-12-2022, 09:00 PM
I'd google the weight of a 7mm08 superlite. Should be about the same as that I'd think? If there's a 6.5prc superlite being released next year I'd definitely wait for that. Slap on an aftermarket...
Liked On: 24-12-2022, 09:00 PM
Bergara every day. Rem 700 footprint. Heaps of aftermarket stocks etc. Lastly they shoot really well. But if it doesn't fit you don't waste your time.
Liked On: 20-12-2022, 06:32 PM
I’d go begara
Liked On: 20-12-2022, 03:26 PM
I’d go whatever you like the feel of better. Bergara are making some nice rifles and Tikka is just good old Tikka. Bought a Bergara BMR 22lr this morning, very nice little setup.
Liked On: 20-12-2022, 03:26 PM
In my 20" tikka I am using hornady brass. I didnt have any published load data for superperformance but went on another members load. I started at 55.6 gn in .2 inrcrements to 57.2. From looking...
Liked On: 19-12-2022, 12:28 AM
depending on which load shoots the best of the 2 seating depths it will either be about 15 thou or 21 thou or there abouts, currently at work so can't check what I wrote down as my jam measurement
Liked On: 18-12-2022, 05:24 PM
ask and you shall recieve :D 212503 here is the seating depth ladder.....after tallking to my mate Jock he reckons I should also try the seating depth at .644 again as well, so I have loaded...
Liked On: 18-12-2022, 12:00 AM
Interesting afternoon at the range shot my seating depth ladder and have nailed a pretty sweet load. So yesterday the load that had the best ES and SD shot a less than stellar 1.8" 3 shot group,...
Liked On: 17-12-2022, 11:59 PM
Reviving an old thread of mine as I'm back at it again. This time working up a load for a 30-06 ackley improved After fire forming with some sako brass and cheap 155gn fmj, I loaded a charge ladder...
Liked On: 17-12-2022, 11:57 PM
so get any half competent gunsmith to run longer throated reemer up its gunger if its that big of issue....yes will void warrantee...yes will cost you..but if thats what you want,what you really...
Liked On: 14-12-2022, 07:49 PM
Page 3, 4th post
Liked On: 12-12-2022, 07:22 PM