Alright, I've joined the club. Looking forward to playing with a new caliber. Factory ammo to start so I can get used to it and build up some brass, reloading later.
Liked On: 25-12-2022, 06:14 AM
My Tikka t3 with heavy (19mm at the suppressor bush) 19inch barrel 243, scoped suppressed, ready to go hunting with a 3-9 Bushnell elite is band on 8 pounds or 3.6 kg. So should be close with the set...
Liked On: 24-12-2022, 09:48 PM
I'll see how they feel, I can always make the Tikka fit better but I can't make the Bergara lighter without spending a lot.
Liked On: 21-12-2022, 07:48 PM
I'll see how they feel, I can always make the Tikka fit better but I can't make the Bergara lighter without spending a lot.
Liked On: 20-12-2022, 07:43 PM
Some very thorough testing there dannyb that fits pretty well with the berger seating depth recommendations, I'm pretty sure theirs goes 10 thou jam, 20 thou jump, 50 thou jump, and so on in 30 thou...
Liked On: 18-12-2022, 12:35 AM
It's not the bullet weight that's the problem, it's this specific bullet. My t3 with a 10 twist barrel shoots 95 grain ballistic tips into the same hole, not ragged, the same hole at 100 yards. It...
Liked On: 11-11-2022, 09:08 PM
The 95 grain best? Super accurate but I haven't shot anything with them yet. I had heard that as well, hod together at high speeds but still expand. Mine is a 19 inch barrel so only doing 3100fps,...
Liked On: 11-11-2022, 08:40 PM
It's not the bullet weight that's the problem, it's this specific bullet. My t3 with a 10 twist barrel shoots 95 grain ballistic tips into the same hole, not ragged, the same hole at 100 yards. It...
Liked On: 10-11-2022, 08:29 PM
Thanks for the post Philipo I found it informative as you intended :thumbsup: I have been wondering about this very topic having a barrel with 14x1 thread and another 5/8 x 24, wondering how close...
Liked On: 16-10-2022, 11:38 AM
Thanks for the post Philipo I found it informative as you intended :thumbsup: I have been wondering about this very topic having a barrel with 14x1 thread and another 5/8 x 24, wondering how close...
Liked On: 10-10-2022, 10:18 PM
Thanks for the post Philipo I found it informative as you intended :thumbsup: I have been wondering about this very topic having a barrel with 14x1 thread and another 5/8 x 24, wondering how close...
Liked On: 10-10-2022, 06:47 PM
I agree, most people don't shoot animals far enough away to notice the difference but it can cause headaches, confusion and be potentially dangerous when developing a load which is relevant here....
Liked On: 30-09-2022, 11:05 AM
I agree, most people don't shoot animals far enough away to notice the difference but it can cause headaches, confusion and be potentially dangerous when developing a load which is relevant here....
Liked On: 28-09-2022, 10:40 PM
I agree, most people don't shoot animals far enough away to notice the difference but it can cause headaches, confusion and be potentially dangerous when developing a load which is relevant here....
Liked On: 27-09-2022, 05:28 PM
Hodgdon data uses Winchester brass. In my experience has a larger internal capacity than most other brass meaning you'll need a higher charge weight to get the same pressure/velocity than brass with...
Liked On: 25-09-2022, 09:27 PM