If it doesn't settle, and the stock tension adjustment doesn't change things look at the barrel and crown. If it's dirty give it a good clean, sometimes .22's (and I know most people think don't...
Liked On: 17-11-2023, 10:05 AM
CCI subs worked best in my old jw,touching holes at 30yds.
Liked On: 17-11-2023, 07:24 AM
If the rifle has not been used a lot, it may need a few hundy rounds through it before it settles down. Don't despair!
Liked On: 17-11-2023, 07:24 AM
Bugger - team out bunny shooting tonight - they'll pop 50-100 and I'm not with them :( :( So - time for some basic thoughts for your JW accurising: * When you begin to tighten the front king...
Liked On: 16-11-2023, 11:11 PM
Buy a wooden stock. Or you can do the carbon fibre arrow stiffen job on thw fore end. Epoxy or bedding compund to set them in. A quock google should put you on thw right track. Mudgrips is the 22...
Liked On: 16-11-2023, 09:39 PM
Roughen the inside of the foreend, and use a small amount of boatbuilding epoxy resin with microballons in it to lower the density. Hugely stiff, impervious, and sticks like poo to a fancy bed...
Liked On: 16-11-2023, 09:39 PM
unfortunately those plastic stocked JW-15s are a bit hit-and-miss for accuracy. The Polytech and Gun City ones are pretty average . Earlier , wooden stock ones are the best of the lot - but they...
Liked On: 16-11-2023, 09:38 PM
Looks like Litz is spot on with my real world test at 608y. ...
Liked On: 12-11-2023, 02:28 PM
Reshot the Tikka 6.5PRC in 24 degrees today with a Swaro Z5 on it. Reloader 26 is proving very stable from the single digit winter weather when last shot. A mate had his new Tikka in the same...
Liked On: 12-11-2023, 02:27 PM
Here's a 9rd group I got with mine a couple weeks back. Shooting 130gr VLD's over AR2217 at about 3150. 237366
Liked On: 12-11-2023, 02:27 PM
I guess you guys see these all the time but it was interesting for me. This one went in through the head and came to rest under the skin by a front shoulder of a rabbit. 236884 236885
Liked On: 09-11-2023, 10:54 AM
I have cuff-links made from fired cases. They are cases with which I won a national title. For me the used primer adds to the story of why I had them made.
Liked On: 13-08-2023, 12:42 PM
Hi there, just noticed this & thought I should chip in that my prices will all be going up approx 10 percent due to jacket prices from the States, our dollar & everything else that is going up. Have...
Liked On: 08-08-2023, 02:10 PM
Thank you. I’ll report back once I get it to my range. Just waiting for a free moment away from daddy daycare duty’s. So most likely next weekend. The gunsmith fired 4 shot though it. Gave me the...
Liked On: 06-08-2023, 06:22 PM
Not tested in .243 obviously otherwise id be sharing data
Liked On: 02-08-2023, 10:09 PM