Story of .338 Lapua Magnum | Nammo Lapua (http://www.lapua.com/en/story-of--338-lapua-magnum.html) 49636 Has anyone ever seen one of these in NZ? I'm curious to know if an NZ gunsmith would...
Liked On: 18-05-2016, 12:16 PM
The problem with that is they read it as one submission only. Each submission needs to be individual to count.
Liked On: 17-05-2016, 05:08 PM
After reading this thread, I decided I would see if sorting my cci subs would make a blind bit of difference. A few minutes on the lathe had a sizing block made, and the dial indicator was put to...
Liked On: 16-05-2016, 03:50 PM
Short as you can legally can. Sent from my SM-G900I using Tapatalk
Liked On: 11-05-2016, 11:57 PM
For rabbits at the distance, I would suggest 750fps or more for a 22 cal air rifle or 1000fps for a 177 cal. Find out what pellets give you the best accuracy and go from there. I am not a fan of...
Liked On: 11-05-2016, 03:13 PM
zimmer, I am using this Norma Match 22LR Link (http://www.norma.cc/en/Products/Target/22-LR-Norma-1-and-2/22-LR-Norma-Training-2/) - but mine comes in a different box. My testing with 22LR...
Liked On: 11-05-2016, 03:08 PM
if your serious about varminting, then barrel life needs to be considered. In 0.224 cal a 22-250 will give you 1200-1500 rounds before your throat and accuracy goes south. In 6mm cal a...
Liked On: 11-05-2016, 02:28 PM
Forgive me if im wrong as i know little to nothing about evil black rifles but are those colt A2 uppers not sought after? I would have thought it would be easier/cheaper to just get a different upper...
Liked On: 11-05-2016, 10:32 AM
They make Tikka look like the rifles they really are. The Los is a far better grade of rifle. We used to sell them and they are so good that when one cam up for sale a former gunsmith that worked...
Liked On: 10-05-2016, 08:01 PM
I'm in Canterbury too, so mainly in open country. last 6 deer: 305yds 475yds 160yds 387yds 265yds 405yds While I enjoy time in the bush, the tops are so spectacular!
Liked On: 10-05-2016, 11:01 AM
Sounds like a lot of work.
Liked On: 10-05-2016, 10:41 AM
Got a bit bored this arvo so made a very Rough induction annealing circuit out of stuff lying around my bench. Built the coil from some scrap Coax cable Works OK, draws 5 amps in "standby" and...
Liked On: 05-05-2016, 07:57 AM
49005
Liked On: 04-05-2016, 08:44 PM
yay!!! Here is my AR in the new configuration, "E" cat now! 49009
Liked On: 04-05-2016, 12:50 PM
I think the Mercedes SLK is regarded as the industry standard in pussy magnets
Liked On: 03-05-2016, 02:49 PM