rewa
Member

3376 Likes

Page 120 of 226 First ... 2070106107108109110111112113114115116117118119120121122123124125126127128129130131132133134170220 ... Last

• Jump to page:

1. 
   rewa liked post by MSL On thread : 5shot cold bore 600yards

   It uses electrickery

   Liked On: 25-09-2019, 11:13 PM

2. 
   rewa liked post by blair993 On thread : 5shot cold bore 600yards

   While at the f class in ashburton i had a chance to check dope on my new(to me) tikka 260rem with ahtlon Midas TAC 4-16 at 600yards. Zeroed it the week before. Rough data showed 3.8mil to dial so...

   Liked On: 25-09-2019, 11:12 PM

3. 
   rewa liked post by 25 /08 IMP On thread : Annealing, neck turning all that attention to neck tension and true Centering

   I made this parts all from Amazon cost under $100.https://uploads.tapatalk-cdn.com/20190925/4e3eea81906949b69767b1b95e3ffefe.jpg Sent from my CPH1903 using Tapatalk

   Liked On: 25-09-2019, 11:07 PM

4. 
   rewa liked post by bully On thread : Annealing, neck turning all that attention to neck tension and true Centering

   He's right in a way. If you start with a good brand brass the neck thickness hopefully is fairly good, and probably doesn't make too much difference. Also if he Chuck's his brass after 2 or 3 shots...

   Liked On: 25-09-2019, 11:05 PM

5. 
   rewa liked post by bully On thread : Annealing, neck turning all that attention to neck tension and true Centering

   If I was you I would be annealing first. Get the neck tention the same every shot. Check run-out of fired cases and after sizing. (The neck) In saying that a factory load in a factory rifle can do...

   Liked On: 25-09-2019, 11:03 PM

6. 
   rewa liked post by rossi.45 On thread : Annealing, neck turning all that attention to neck tension and true Centering

   if your a competion shooter every 1000th of an inch gained gives you an advantage over the other guys . . . if your the type of hunter who can't shoot for shit anyway it does'nt matter anything...

   Liked On: 25-09-2019, 11:01 PM

7. 
   rewa liked post by Happy On thread : 222 Loads

   In the used rifle arena I would Buy a box of superformance and check its accurate and doesn't shoot round corners FIRST... Had three used ones before finding a keeper. (One of which I...

   Liked On: 25-09-2019, 10:43 AM

8. 
   rewa liked post by planenutz On thread : The “you can’t go wrong” .223 load

   My standard load has been as follows: CCI 400 primers 26.6gr of Belmont's ARP 747 powder (its what they use in their factory loads... and its cheap!) 55gr Hornady SP pills P/N: 2226B (because...

   Liked On: 23-09-2019, 08:28 PM

9. 
   rewa liked post by Marty Henry On thread : The “you can’t go wrong” .223 load

   For target work that may be true, my best hand load 26 gr 2206h and a 55 gr sierra gameking shoots .4 moa and the belmont .7. For hunting within the 223s ethical range the belmont is way accurate...

   Liked On: 23-09-2019, 08:26 PM

10. 
    rewa liked post by Sakoswarosorted On thread : The “you can’t go wrong” .223 load

    Have heard that it’s really good stuff. I do enjoy loading my own though and the satisfaction and the tune-ability you get from handloads :)

    Liked On: 23-09-2019, 08:26 PM

11. 
    rewa liked post by 199p On thread : The “you can’t go wrong” .223 load

    Belmont black shoots great in every 223 ive tryed it in and at .65c each when i last brought some its not worth reloading. Sent from my SM-G975F using Tapatalk

    Liked On: 23-09-2019, 08:25 PM

12. 
    rewa liked post by dogmatix On thread : The “you can’t go wrong” .223 load

    25.4gn of ADI 2206h with a 55gn projectile (SP, HP, FMJ, Blitzking, V-Max) seems to be a magic number in the various .223/5.56 rifles I've had. 119817

    Liked On: 23-09-2019, 08:23 PM

13. 
    rewa liked post by Micky Duck On thread : The “you can’t go wrong” .223 load

    24.5GRNS AR 2206 mild but shoots very well I have used that behind everything from 50-55grns over the years...now use 748 cause it was cheap....like me. for deer my go to is now a 50 grn ttsx with...

    Liked On: 23-09-2019, 08:23 PM

14. 
    rewa liked post by Micky Duck On thread : Reloading for 270 Win

    if you are as your name suggests a once a year deer shooter....consider a 150 grn partition load......not saying the eldx isnt going to be good...just that the partitions are AWESOME. 2213sc is good...

    Liked On: 23-09-2019, 08:21 PM

15. 
    rewa liked post by 7mmsaum On thread : Tikka TX1 vs CZ 457

    The T1X fit standard Tikka T3 centrefire stocks so finding a timber one is easy enough I use the 16 in barrel as it’s easier around vehicles etc and a longer barrel is unnecessary for velocity ...

    Liked On: 23-09-2019, 08:05 PM

Page 120 of 226 First ... 2070106107108109110111112113114115116117118119120121122123124125126127128129130131132133134170220 ... Last

• Jump to page: